Roland Super JX-10 Owner's Manual page 6

Midi polyphonic synthesizer super jx
Hide thumbs Also See for Super JX-10:
Table of Contents

Advertisement

5. Hold Pedal Jack
By connecting the optional pedal switch DP-6 or DP-2, the Hold effect can be turned on or off by pressing the
pedal. "Hold" is the effect of keeping the sound even after the key is released.
6. MIDI Connector
This is for connecting to other MIDI device using the MIDI/SYNC cable (optional).
7. Programmer Connector
Connect this to the programmer PG-800 (optional) using the supplied 6P DIN cord.
8. Protect Switch
Always make sure that this switch is set to the ON position to protect the data in the JX-10, except when saving or
loading data.
9. Control Assign Jack
Use this jack when assigning the Control Changes with the expression pedal or pedal switch.
Roland JX-10 Manual – Firmware ver 3.00 ADDENDUM
Pag. 6 of 53

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents