Roland Super JX-10 Owner's Manual page 16

2) Mode
This sets how the delayed sounds are output sequentially. As you rotate the a Dial, the Display changes as "U-L-
U", "U-L-L-" or "U-L".
•
Key Mode Select: Whole (Upper, Lower), Dual and Split
•
Tone Number:
•
Chase Play:
3) Time
This sets the time between the first (Upper) sound and the second (Lower) sound.
Push the TIME of the Chase Play Buttons to turn to the Time adjusting mode, then change the value rotating the α
Dial. 01 to 99 are valid and the higher number is longer time.
When you have completed editing all the functions, hit the Enter Key.
*As the level described on the previous page in "1) Level" is set higher and the key touch is stronger, more delay
sounds are obtained. If the Tone Parameter Number 63 "VCA Dynamics Range" is set to OFF, the volume of the
sound does not change, but repeats at the same volume.
Tone(s) in a Patch Memory
When the Key Mode is Dual, delay-like effect can be obtained
52 chase play mode
52 chase play time
Roland JX-10 Manual – Firmware ver 3.00 ADDENDUM
Pag. 16 of 53
******
******: U-L-U-
U-L-L-
U-L
Three Modes
**
**: 01 to 99