Roland Super JX-10 Owner's Manual page 28

c. Recallling a Tone
"Recalling a Tone" is the function which can be used during a Tone editing. While you are editing a Tone, you may
want to call the original Tone which is intact to probably compare it with the one you have edited.
PROCEDURE
1. Push the RECALL button. The Display respond with:
Playing the keyboard will instantly recall the original Tone. * Naturally, this Tone cannot be edited.
2. Push the Recall Button. The edited Tone is retrieved.
Likewise, each time you push the Recall Button, the original and the edited Tones are alternately called.
Roland JX-10 Manual – Firmware ver 3.00 ADDENDUM
Pag. 28 of 53