Roland Super JX-10 Owner's Manual page 34

WRITE ARPEGGIATOR?
MIDI BULK DUMP INTERNAL?
MIDI BULK DUMP CARTRIDGE
COPY INTERNAL TO CARTRIDGE
COPY CARTRIDGE TO INTERNAL
TEST MODE 1
TEST MODE 2
SEND CARTRIDGE
Pressing <ENTER> button the arpeggiator settings 1 -7 for arpeggiator memories A
– H will be saved.
Pressing <ENTER> button the internal Patch, Tone and relevant Factors data will
be sent over MIDI OUT port.
Pressing <ENTER> button the Cartridge Patch, Tone and relevant Factors data will
be sent over MIDI OUT port.
Pressing <ENTER> button the internal Patch, Tone and relevant Factors data will
be copied to the Cartridge
See also pag. 35
Pressing <ENTER> button the Cartridge Patch, Tone and relevant Factors data will
be copied to the internal memory.
See also pag. 35
Displays which sound board voices are playing. Extra on the JX10: display the A/D
converter raw values in hexadecimal (C1/C2/bender/aftertouch) and the last note
played on the keyboard (velocity and note number)
Tests the memory chips (also cartridge if inserted). Each time <ENTER> is pressed,
the test is re-run. Preserve the memory content.
Pressing <ENTER> button the Cartridge Patch, Tone and relevant Factors data will
be sent over MIDI OUT port.
Roland JX-10 Manual – Firmware ver 3.00 ADDENDUM
Pag. 34 of 53