Parameters For The Pedal Sockets - Generalmusic WK3 World Keyboard Owner's Manual

Page 4/7 - Parameters for the pedal sockets
VOLUME PEDAL... (F1, F2)
A Volume Pedal connected to the Volume socket
can be enabled to control the Master Volume or
Section Volume (affects only the Performance
tracks enabled for Volume control).
Rotate the DIAL to change the parameter status.
Assignable values: Master, Section
PEDAL 1... (F3, F4)
Assigns a switch-action function to a switch-con-
trol pedal connected to the "1" pedalswitch socket.
Rotate the DIAL to select the pedalswitch func-
tion.
Assignable values: Soft, Start/Stop, Fill<, Fill><,
Fill>, Intro, End, Key Start, Fade In/Out, Perform-
ance +, Performance –, min, 7th, Punch, Rotary.
4/7 GENERAL: [VOLUME PEDAL]
VP=Master
Edit General - Volume Pedal
P1=Soft P2=Sosten
PEDAL 2... (F5, F6)
Assigns a switch-action function to a switch-con-
trol pedal connected to the "2" pedalswitch socket.
Rotate the DIAL to select the pedalswitch func-
tion.
Assignable values: Sostenuto, Start/Stop, Fill<,
Fill><, Fill>, Intro, End, Key Start, Fade In/Out,
Performance +, Performance –, min, 7th, Punch,
Rotary.
DAMPER... (F7, F8)
Assigns a switch-action function to a switch con-
trol pedal connected to the "Damper" pedalswitch
socket.
Rotate the DIAL to select the pedalswitch func-
tion.
Assignable values: Damper, Start/Stop, Fill<,
Fill><, Fill>, Intro, End, Key Start, Fade In/Out,
Performance +, Performance –, min, 7th, Punch,
Rotary.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Edit General 14•5
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○