Generalmusic WK3 World Keyboard Owner's Manual page 200

2/2 SYSTEM EXCLUSIVE (F1, F2)
Press PAGE+ to enter the second level of MIDI
SET parameters.
This parameter enables/disables the transmission
and reception of system exclusive messages.
At the time of writing, WK3 has been implemented
with the following Sys Ex possibilities:
Data Dump transmission/reception;
General MIDI On/Off compatibility
Master Volume
Use the standard Edit procedure. Press ESCAPE
to return to the main display.
2/2 MIDI SET: [SYSTEM EXCLUSIVE]
Sys.Ex=Off Sys.Ex.Id=00
MIDI SET: System Exclusive
Assignable values: On, Off
○ ○ ○ ○ ○ ○ ○ ○
Note: Future WK3 Software updates will
implement additional Sys. Ex possibilities. System
Exclusive data can control the editing parameters
of the instrument, and can cause radical changes
in the way WK3 operates. These messages are
widely used in the most recent MIDI files, to send
editing messages before the start of a Song.
○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○
. Note: To transmit and receive system
exclusive messages, connect both MIDI IN and
MIDI OUT of WK3 to the MIDI OUT and MIDI IN
respectively of the external sequencer (commonly
known as the «Closed MIDI Loop» connection).
○ ○ ○ ○ ○ ○ ○ ○
2/2 SYSTEM EXCLUSIVE ID # (F3, F4, F5)
Specifies the WK3 Identification number for the
reception of system exclusive messages. The
ID number permits the identification of instru-
ments of other manufacturers in a MIDI chain.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
13•14 Reference Guide
WS Mode=Off
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Use the standard Edit procedure. Press ESCAPE
to return to the main display.
2/2 MIDI SET: [SYS. EXCL. ID. NUMBER]
Sys.Ex=Off
MIDI SET: System Exclusive Identification Number
Assignable values: 00 ... 127
2/2 WS MODE (F6, F7, F8)
This parameter, when On, configures WK3 in or-
der to be able to interface with the Gem Series
WS instruments.
In order to communicate correctly with WS Se-
ries instruments, set this parameter to ON.
If WS Mode is set to Off, WK3 will not be able to
communicate correctly with WS Series instru-
ments.
Use the standard Edit procedure. Press ESCAPE
to return to the main display.
○ ○
2/2 MIDI SET: [WS MIDI STATUS MODE]
Sys.Ex=Off
MIDI SET: WS MIDI Status Mode
Assignable values: On, Off
○ ○
○ ○
○ ○
○ ○
Sys.Ex.Id=00 WS Mode=Off
Sys.Ex.Id=00 WS Mode=Off