Generalmusic WK3 World Keyboard Owner's Manual page 266

RECORDING PROGRAM CHANGE DATA
If you change Sound in one of the tracks, the
relative Program Change is recorded in the track.
RECORDING CONTROL DATA
Control data generated by the on-board control-
lers (pedals and trackball) and any Control mes-
sages received via MIDI are captured in the
tracks.
To record Section Volume events, use the Slid-
ers or the Volume pedal. Remember to program
the Volume Pedal for Section Volume control in
«Edit General» Volume Pedal parameter. The
Volume Pedal set for Section Volume generates
Expression events.
RECORDING TEMPO DATA
Tempo Changes effected during the recording are
captured in the Tempo track. Entering Song Rec
mode activates the Tempo Rec option in the
Master Track automatically.
THE COMMON TRACK
The Sequencer buttons also incorporate the
CHORD/COMMON button which controls both
CHORD and COMMON tracks. In Song mode,
the Chord track disabled.
If you activate the Common track when you en-
ter Record mode, you can record events relating
to panel interventions.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
18•8 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
TEXT, FF, REW
In Song Record mode and playback mode, the
FF and REW buttons are enabled.
If the current Song contains a Lyrics track, the
TEXT button activates the track and scrolls the
Song lyrics across the display in Song playback
mode.
If WK3 is fitted with the optional Audio/Video In-
terface, the lyrics can be projected onto an ex-
ternal monitor or domestic TV connected to one
of the rear panel Video sockets. See page 9,
Songs chapter 7, User Guide for detailed infor-
mation.
Pressing TEXT in playback mode displays the
Song lyrics:
just CALL on me and I'll send it along
with love from me to you
Cancel the display with TEXT or ESCAPE.
SONG EDITING
The sequencer incorporates several edit functions
which help to optimise your recorded Songs:
Quantize, Clear, Master Track, Copy.
The sequencer edit functions are operational in
Record mode only, when the RECORD button is
flashing. In playback mode (Record off), se-
quencer editing is not permitted. If you press one
of the sequencer editing buttons when WK3 is
not in record mode, the display will flash the mes-
sage:
The display cancels automatically to returns to
the previous status after a few seconds.
Refer to the Sequencer Edit chapter 19 for de-
tailed information of each edit function.
○ ○