Generalmusic WK3 World Keyboard Owner's Manual page 116

LOAD SAMPLE
The procedure is identical to the Load Styles and
Load Performances procedures explained on the
previous pages. In practice, Samples are load-
ed directly to the battery backed Sample-RAM
(the Samples bank).
• Use function button F7 to select the option after
pressing DISK.
○ ○ ○ ○ ○ ○ ○ ○
Note: The Load Sample procedure clears the
Sample_RAM of current data. Make sure,
therefore, that you save your Samples to disk
before carrying out the Load Sample procedure.
○ ○ ○ ○ ○ ○ ○ ○
«Load Sample» performs a test to determine the
origin of the Sample. If the source corresponds
to Generalmusic WK3 Samples kits, these are
loaded automatically to locations 1-6 of the Sam-
ples bank. CD series Samples load to location
7. A Sample captured with the WK3 Mic/Line
Sampling feature loads to location 8.
To assign a Sample to a keyboard track, refer to
the procedure outlined on page 6 of Chapter 4 of
the User Guide, Sounds & Performances.
To assign Samples to the Pads, refer to the meth-
ods described in the section entitled "Assigning
Samples to the Pads" in the Rec/Edit chapter 19,
Pads Assignment section, Reference Guide.
LOADING ALL DATA FROM DISK
The «Load All» procedure loads:
• All Songs and Song/Styles (and relative Song
Performances);
• All User Styles (and associated Style-Per-
formances);
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
6•10 User Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
• All Performance (including user-programmed
Style-Performances);
• A WK3 Sample.
MidiFiles are not loaded with this procedure.
Use Load MidiFile for this file type.
If a Song make use of a Sample, this will be car-
ried into memory together with the Song, provid-
ed that the original Sample is also on the same
disk.
○ ○
LOAD ALL
The procedure is identical to the «Load Styles»
○ ○
and «Load Performances» procedures. «Load
All» loads directly to RAM.
Use function button F8 to select «Load All» after
pressing DISK.
The instrument's RAM will be completely rewrit-
ten by the data contained in the ".ALL" file.
○ ○ ○ ○
Warning: «Load All» cancels all user-
programmed data in RAM, including Programmable
Styles, Song/Styles and Performances. Be
absolutely sure that any user-programmed data
that you do not want to lose has been saved to disk
before carrying out the Load All procedure.
○ ○ ○ ○
If a Song is currently in playback, the "ALL" data
set is "parked" in a temporary location of the in-
strument's RAM in order to allow the Song to play
to its end. As soon as it stops, it is erased auto-
matically by the "ALL" data set transferred to RAM
at Song end.
○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○