REGULATE THE GENERAL EFFECT
VOLUMES AND ACTIVATE LOUDNESS
It is possible to regulate the general effect vol-
umes to suit the surroundings and activate the
Loudness function.
Although each Performance recalls appropriate
effect volume settings and mixer settings for each
track, a general setting can be applied to render
the effects more or less intense with a single com-
mand.
The Loudness control introduces a particular
equalisation (a simultaneous control of the Bass
and Treble tones - similar to that found on home
stereo units). When Loudness is ON, it favours
certain frequencies at low volume.
1. Press the GENERAL button (close to the EDIT PER-
FORMANCE section).
The first page of Edit General is opened.
2. Press the PAGE+ button once.
3. Select the parameters with the Function buttons:
Rev=Reverb (F1/F2), Eff=Effect (F3/F4),
Loud=Loudness (F5/F6).
4. Modify the selected parameter with the Dial.
○
○
○
○
○
○
○
○
Hint: You can use the F1-F2, F3-F4 sliders to
change the parameter values directly without
selecting them. The Loudness control can be
switched ON and OFF by toggling with the F5 or F6
Function buttons.
○
○
○
○
○
○
○
○
5. Press ESCAPE per return to the default display.
The settings remain in memory (RAM) after
turning off the instrument.
○
○
○
○
○
○
○
○
○
○
1•8 User Guide
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
1/2
3/4
5
○
○
○
○
○
○