Transpose The Instrument (Semitones) - Generalmusic WK3 World Keyboard Owner's Manual

TRANSPOSE THE INSTRUMENT (SEMI-
TONES)
If you are playing a difficult tune that requires the
use of several black keys, or a tune that is too
high or too low for a singer or another instrument,
you can transpose WK3 to play the tune in an
easier key.
The TRANSPOSE / buttons allow real time
semitone adjustments (transpositions) of the
overall pitch (range ± 12 semitones = 1 octave).
1. Press either TRANSPOSE or TRANSPOSE .
The current status of the keyboard transpo-
sition (0 = standard pitch) is shown for about
3 seconds in the bottom right hand corner of
the display.
2. Press TRANSPOSE to raise the pitch or TRANS-
POSE to lower the pitch.
If you press TRANSPOSE once, the dis-
play shows an increase of +01.
If, instead, you press TRANSPOSE once,
the display shows a decrease of –01:
Holding either button pressed changes the
value continually until +12 or –12 is reached.
The led on one of the buttons will be on to
indicate the instrument is currently in a Trans-
posed status (sharp or flat ).
Clear the keyboard transpose setting
3 Press both TRANSPOSE buttons simultaneously.
The led on the active button goes off and the
instrument's normal pitch is restored. The
display shows the 0 setting for a few seconds
then returns to normal.
○ ○ ○ ○ ○ ○ ○ ○
Note: Pressing both Transpose buttons at the
same time also provides a PANIC function.
○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
2
3
○ ○
○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○
Get started 1•9
○ ○ ○ ○ ○ ○