Generalmusic WK3 World Keyboard Owner's Manual page 72

TRANSPOSING THE TRACKS (BY
SEMITONES)
The Performance tracks can be individually trans-
posed in semitone steps using the "Section Trans-
poser" function in «Edit Performance». The range
over which a section can be transposed is ± 24
semitones (2 octaves) and the settings can be
stored to the Performance.
1. Press PERFORM. in the EDIT PERFORMANCE sec-
tion.
2. Press PAGE + to enter the SECTION TRANSPOSER
on page 2.
3. Select the track that requires transposing using
the Function buttons.
4. Rotate the Dial to set the required transposition
(+ value = transpose UP, - value = trans-
pose DOWN).
Instead of using the DIAL, you can change
the track transpose setting by intervening di-
rectly on the corresponding sliders (F1...F8).
If you use the sliders, it is not necessary to
select the tracks.
5. Escape «Edit Performance» by pressing ESCAPE.
To save the transposition settings, save the Per-
formance using STORE PERF. Otherwise, the
changes will be lost if you select a different Per-
formance or the same one again.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4•14 User Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1/2
PERFORM.
3
4
5
ENTER
ESCAPE
○ ○
PAGE
PAGE
TEMPO
DATA
OR
DRUMS BASS ACC. 1 ACC. 2 ACC. 3 LOWER
F3
F1 F2 F4 F5 F6
UPPER 2 UPPER 1
F7 F8