Generalmusic WK3 World Keyboard Owner's Manual page 278

TEMPO REC
This option is available for all three record modes.
Activate the Tempo Rec function to record Tem-
po changes during the recording. The tempo
changes are recorded in a Tempo Track.
1/1 MASTER TRACK:[TRACK TEMPO]
4 /4 B=02 Name K=C
User Style Tempo Rec
Assignable values: Play, Rec
HOW TO "PUNCH IN" A CORRECTION
If you have opted to set the PUNCH function in
the Master Track to On and have assigned the
PUNCH function to a switch pedal (1, 2 or Damp-
er), here's how to correct a track containing a
part with mistakes to avoid repeating the record-
ing.
User Style and Song/Style method
1. While you are still in record mode (Record flash-
ing) with the track containing the wrong events,
press Start/Stop to start the playback of the re-
corded track.
The track plays back exactly as recorded.
DO NOT PLAY ANY NOTES to avoid adding
new events to those already recorded.
2. An instant before playback reaches the point con-
taining the wrong events, press and hold the
switch pedal.
The record mode changes from Overdub to
Replace, allowing you to record new events
and cancel existing ones at the same time.
3. Start to play the correct sequence of notes.
4. When you have finished playing the correct se-
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
19•12 Reference Guide
Off Play Play Rec
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
quence of notes, release the switch pedal to de-
activate Replace recording.
If you continue pressing the pedal, notes will
be cancelled even without playing.
5. Press START/STOP to stop the recording.
6. Listen to the playback to check the correction.
Song method
To punch a correction into a Song track:
1. Enter Song Record mode and select the track to
correct.
2. Use the MEASURE function to specify a measure
one or two measures before the one where the
corrections are to be applied.
Press both FF and REW buttons together to
activate an entry zone.
Specify the required measure using the nu-
meric keys of the keyboard (top two octaves
of black notes).
Press ENTER to confirm. The Measure coun-
ter passes directly to the specified measure.
3. Press CONTINUE to start the Song at the speci-
fied measure.
4. Proceed as described from point 2 of the instruc-
tions for User Styles and Song/Styles.
If you do not possess a switch pedal
If you do not possess a pedal switch, you can
intervene directly an instant before the beginning
of the wrong events and play the correct notes
but, as soon as you have finished playing, stop
the recording with Start/Stop.
○ ○