Generalmusic WK3 World Keyboard Owner's Manual page 70

CHANGE THE TRACK STATUS
The keyboard sections (Tracks 6-8) of a Perform-
ance can be either in the active or mute status.
An active track can play, while a muted one can-
not and can no longer receive MIDI messages.
(Via MIDI, WK3 is 16 part multi-timbral, regard-
less of the current playing mode).
It is possible to toggle between the active and
mute status in order to instantly add or remove a
keyboard sound while playing. This is done by
the direct intervention on the keyboard activa-
tors (Upper 1, Upper 2, Lower).
The tracks not normally shown on the main dis-
play (Style accompaniment tracks, Song/Style
tracks or Song tracks) can be changed by the
direct intervention on the Sequencer tracks.
Style, Song/Style and Song tracks that are en-
gaged by the sequencer are identified by the led
of the corresponding track button shown on.
To change the status of the keyboard tracks
• Press UPPER 1 to activate/mute the Upper 1
section and press again to return to the previous
status.
○ ○ ○ ○ ○ ○ ○ ○
Note: When FULL MODE is selected, LOWER
is disabled. In SPLIT MODE, LOWER is enabled.
○ ○ ○ ○ ○ ○ ○ ○
The change the status of a Style track
• Press one of the active buttons in the Sequencer
to mute a Style track and press again to return
to the previous status.
The led on the button shows the active/mute
status of the corresponding track. When the
led is on, the track is active; when off, the
track is mute.
The modified status of the tracks can be memo-
rised to the Performance by pressing STORE
PERF. See page 16 to store Style Performances.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
4•12 User Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○
○ ○
○ ○
Active Mute