Erase "Drumkit" And Clear "Drumkit - Generalmusic WK3 World Keyboard Owner's Manual

Erase "Drumkit" and Clear "Drumkit"

The Drumkit Edit parameters incorporate two op-
tions that allow you to restore the edited Drumkit
memorised to a Performance to the original Rom
status:
• Erase "Drumkit" to restore the Rom param-
eter status of a single percussive sound of
the Drumkit assigned to the current Perform-
ance.
• Clear "Drumkit" to restore the Rom param-
eters status of all the edited percussive
sounds (4) of the Drumkit assigned to a Per-
formance.
In both cases, all other edited Drumkit memo-
rised to other Performances remain unchanged.
3/3 ERASE "DRUMKIT" [KEY=XX] (F3,
F4, F5, F6)
This page is accessed from the second level page
of the Drumkit parameters for the note in edit.
1. Press SOUND to enter the Edit of the Drumkit.
2. Select the displayed Drumkit Program Change
with the corresponding Function button.
The display enters the first level page show-
ing the "CATCHNOTE" function.
3. Select the note you wish to erase to enter the
edit of the percussive sound.
The display enters the first level of drumkit
parameters.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
13•34 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
2
1/2 SOUND EDIT:[Bk2:STAND1]
113
3
1/2 SOUND EDIT:DRUM=STAND1 [PRESS A KEY]
Catchnote
1/3 SOUND EDIT:STAND1 [VOLUME]
Vol=12
○ ○
SOUND
C4 ___ ___
Vel=7 Bril=127 Tune=150
___
E C4