Generalmusic WK3 World Keyboard Owner's Manual page 73

TRANSPOSE THE KEYBOARD SECTIONS
(BY OCTAVES)
OCTAVE +, OCTAVE -
The keyboard sections (Upper 1, Upper 2, Lower)
can be instantly transposed up or down one or
two octaves using the OCTAVE +/- buttons. The
maximum octave range is ± 2 octaves. The op-
eration can only be performed on a selected
section and the setting can be stored to the Per-
formance.
1. Select the section that requires an octave change.
Use the section select buttons as already
described (see Page 5 of this manual). The
selected section starts to flash.
2. Press either OCTAVE + or OCTAVE -.
Pressing either button the first time shows
the current status of the octave setting for
the selected section (0 = standard pitch).
3. Press the respective OCTAVE button to transpose
up [+] or down [-] one or two octaves.
Each time you press one of the OCTAVE but-
tons, the octave setting of the selected sec-
tion is raised or lowered by one octave, to a
maximum of ±2 octaves.
○ ○ ○ ○ ○ ○ ○ ○
Note: the Octave setting is summed to the
current transpose value.
○ ○ ○ ○ ○ ○ ○ ○
If you want to keep the change, save the
Performance using STORE PERF. The
changes will be lost if you select a different
Performance or the same one again.
4. To clear the setting, press both OCTAVE buttons
simultaneously
The display shows the 0 setting for a short
period then returns to normal.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
1
UPPER 2
LOWER
UPPER 1
2
3
○ ○
○ ○
4
○ ○ ○ ○ ○ ○
Sounds & Performances 4•15
Upper 1 selected
OCTAVE
OR
OCTAVE
OCTAVE
○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○ ○