Generalmusic WK3 World Keyboard Owner's Manual page 234

3. Select the parameter to edit.
Use the corresponding Function buttons to
select the parameters. The selected param-
eter is shown flashing.
The Reverb type shows a different set of pa-
rameters with respect to the Effects type.
4. Rotate the DIAL to modify the parameter value.
As you change value, play on the keyboard
and listen to the change.
○ ○ ○ ○ ○ ○ ○ ○
Note: If a change of sound is not heard, the
relative DSP button is not selected (led off). Select
it (led on).
○ ○ ○ ○ ○ ○ ○ ○
5. Check that the current effect type is selected in
the DSP section.
Press either REVERBS or EFFECTS to acti-
vate the relative DSP that you are editing.
If the current effect type if off, you will not be
able to listen to the applied changes by play-
ing on the keyboard as you edit.
6. Press ESCAPE to exit the edit of the effect type.
The display returns to the effect type selec-
tion page.
If you wish to edit the other effect type, re-
peat the procedure as described above.
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
15•2 Reference Guide
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
○ ○ ○ ○ ○ ○ ○ ○ ○ ○
3
Reverb edit
1/1 EDIT:HALL1 [REVERB VOLUME/dB]
Vol=127 RvTime=1.5 InDly=100
Effects edit
1/1 EDIT:CHORUS1 [EFFECT VOLUME/dB]
Vol=127 FrqMod=1.5 Depth=100
○ ○
○ ○
4
5
DIGITAL SIGNAL PROCESSOR
6
○ ○
TEMPO
DATA
REVERBS
EDIT
EFFECTS
ENTER
ESCAPE
Filter=-12
Filter=-12