Cancellation Of A Song (Clear Function); Melody Off; Play All Songs; Play A Song With A Track In Real Time - Generalmusic WK2000 SE Owner's Manual

Multimedia workstation

Hide thumbs

Table of Contents

owners manual

If you are not satisﬁ ed with how a track of a Song or MIDI File plays, you can cancel the track using the instructions

explained in the Song Style chapter, under the CLEAR function. After selecting the Song (111-117), it is possible to

cancel the entire song ﬁ le (ALL), the tempo (TEMPO), the Common track (COMMON), any of the 16 tracks that you

select with the Dial.

The MELODY OFF function allows you to listen to the Song playback without

the melody, useful for a singer to sing along with the backing, or to play along

with the song. Press MELODY OFF to cancel the playback of the melody - the

corresponding display indicator turns on to show the activation of the function.

This function allows you to playback all the Songs or MIDI Files present in a

Disk or Hard Disk Partition without at ﬁ rst loading all the data to memory. After

inserting the disk in the drive, or selecting a Hard Disk Partition and pressing

ENTER, simply press the PLAY ALL SONGS button to start the playback.

Most of the Songs that you load into your WK2000 SE will most probably have all

the tracks engaged by the sequencer. You can check this at a glance by looking

at the status of the tracks in the display. If they are all on, including tracks 09-16

(use function button F9 toggle between tracks [01-08] and [09-16], you'll ﬁ nd

that there are no free tracks to play along with the Song during playback. If one

or more tracks are off, this indicates that they are not engaged by the sequencer.

If you want to play along with your Song, you can either:

Disengage one of the tracks used by the Song

Activate one of the tracks not used by the Song

Disengage one of the tracks used by the Sequencer

Select a Song and press PLAY/STOP to start the playback. Check which

tracks are not engaged for the Song

Press one of the function buttons corresponding to an engaged

track

The Volume bars start to ﬂ ash, indicating that the track is active

Press the same function button corresponding to the activated

track a second time

The sound number of the track is cancelled and the track stops

playing

Press the same function button once more time

The tracks sound number starts to ﬂ ash. The corresponding track is

disengaged from the sequencer and is active to play in real time.

Play on the keyboard

You'll hear the sound that was previously assigned to the sequencer

track. Now you can play along with the Song.

Press the same function button To re-engage the track to the sequencer

The track turns on, it is re-engaged by the sequencer and starts to

play the recorded notes of the Song.

Activate one of the tracks not used by the Song

Press twice the function button corresponding to a track not used

by the Song (off). The track starts to ﬂ ash

Play on the keyboard

Press the same button again to deactivate the track. The turns is

deactivated for play

The songs