Operation With An Active Comand Source - Mercedes-Benz COMAND Operating Instructions Manual

be possible to access the settings from the
DVD menu.
Press the 9 button on the remote control
X
and show the menu.
Select DVD-Video and press the 9
X
button on the remote control to confirm.
Select DVD Functions
X
button to confirm.
Select Audio Language
X
button to confirm.
A menu appears after a short while. The
# dot in front of an entry indicates the
currently selected language.
Select a language using the 9:
X
buttons and press the 9 button to confirm.
To exit the menu: press the =
X
or ; button.
Subtitles and camera angle
These functions are not available on all DVDs.
The number of subtitle languages and camera
angles available depends on the content of
the DVD. It may also be possible to access
the settings from the DVD menu.
Press the 9 button on the remote control
X
and show the menu.
Select DVD-Video and press the 9
X
button on the remote control to confirm.
Select DVD Functions
X
button to confirm.
Select Subtitles or Camera Angle
X
press the 9 button to confirm.
In both cases, a menu appears after a few
seconds. The # dot in front of an entry
indicates the current setting.
Select a setting using the 9:
X
buttons and press the 9 button to confirm.
To exit the menu: press the =
X
or ; button.

Operation with an active COMAND source

Interactive content
DVDs can also contain interactive content
(e.g. a video game). In a video game, you may
be able to influence events by selecting and
triggering actions. The type and number of
actions depend on the DVD.
and press the 9
Select an action using the
X
9;:= buttons on the
remote control and press the 9 button to
and press the 9
execute it.
A menu appears and the first entry,
Select, is highlighted.
Press the 9 button.
X
Operation with an active COMAND
source
Switching the function on/off in
COMAND
You can transfer an audio or video source
selected in COMAND to the Rear Seat
Entertainment System.
i
new source will not be transmitted to the
Rear Seat Entertainment System.
To switch on the function in COMAND:
X
switch on the desired audio mode in
COMAND, e.g. CD mode (
show the menu in video DVD mode
(
and press the 9
Select the menu item at the bottom left,
X
e.g.
and
and turning cVd the COMAND controller
and press W to confirm.
A menu appears.
If you then switch modes in COMAND, the
page 188).
Y
CD in audio CD mode, by sliding VÆ
225
page 157), or
Y
Z