Redial - Mercedes-Benz COMAND Operating Instructions Manual

Telephone operation
122
Redialing
On COMAND
Call up the telephone basic menu
X
( page 119).
Y
Select ° in the character bar and press
X
W to confirm.
or
If the telephone basic menu is displayed,
X
press the 6 button in COMAND.
In both cases, the calls dialed list appears.
The most recently dialed number is at the
top.
To select a call: turn cVd the COMAND
X
controller.
To connect the call: press W the
X
COMAND controller.
Connecting a call to an entry in a call list
or in the COMAND phone book
Open a call list and select an entry
X
( page 129).
Y
or
Call up the COMAND phone book and
X
select an entry (
Y
To connect a call: press W the COMAND
X
controller or the 6 button.
Making a call via speed dial
The speed dial list contains stored phone
book entries ( page 131).
Y
Option 1:
Hold down one of the number keys for
X
longer than two seconds.
Option 2:
Call up the telephone basic menu
X
( page 119).
Y
Select Call Lists
X
turning cVd the COMAND controller and
press W to confirm.
The speed dial list appears.
page 126).
by sliding VÆ and
Select Speed Dial Preset List
X
turning cVd the COMAND controller and
press W to confirm.
The speed dial list appears.
Select the storage location and press W to
X
confirm.
Irrespective of the option chosen, the
telephone basic menu appears and
displays the selected entry. This initiates
dialing.
Functions available during a call
Overview
Telephone operation with a single call
Person you are calling
:
Icon for active telephone connection
;
To switch hands-free microphone on/off
=
To send DTMF tones (not possible with all
?
mobile phones)
To end a call
A
The following functions:
accepting a waiting call
R
making a further call
R
call waiting
R
are available if they are supported by the
network (only possible with a GSM network)
and your Bluetooth ® mobile phone.
by