Mercedes-Benz COMAND Operating Instructions Manual page 62

Destination entry
60
Selecting a destination from the
destination memory (e.g. My address)
Introduction
The destination memory always contains an
entry named "My address". You may wish to
assign your home address to this entry, for
example ( page 57), and select it for route
Y
guidance. This entry is always located at the
top of the list in the destination memory.
To switch on navigation mode: press the
X
Ø function button.
To show the menu: press W the COMAND
X
controller.
Select Destination
X
system menu bar by turning cVd the
COMAND controller and pressing W to
confirm.
Select From Memory
X
confirm.
You will see the destination memory list
either with the character bar (option 1) or
as a selection list (option 2).
Option 1: destination memory list with
character bar
Enter a destination, e.g. "My address".
X
Instructions for entering characters using
city input as an example can be found in the
"Entering characters in navigation mode
(entering a city)" section (
:
;
=
in the navigation
?
A
B
C
and press W to
D
E
F
Option 2: destination memory list as
selection list
page 31).
Y
Destination memory list
X
X
Character entered by the user
Characters automatically added by the
system
List entry most closely resembling the
characters entered so far
To switch to the selection list
To delete an entry
Characters not currently available
Character bar
Currently selected character
To cancel an entry
Characters currently available
Select My Address by turning cVd the
COMAND controller.
Irrespective of the option, press W to
confirm your selection.
The address entry menu appears again.
"My address" has been entered.