Mercedes-Benz COMAND Operating Instructions Manual page 103

COMAND controller and press W to
confirm.
A # dot indicates the new setting.
Setting the point of interest icons on the
map
You can set the points of interest you wish to
have displayed as symbols on the map. Points
of interest are, for example, gas stations,
hotels, cinemas and restaurants.
The following settings are possible:
Standard Symbols
R
Symbol display determined by the factory
settings.
Personal Symbols
R
You can determine the symbols yourself.
No Symbols
R
The map does not show any symbols.
To show the menu: press W the COMAND
X
controller.
Select Navi in the main function bar by
X
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
Select Map Settings
X
confirm.
The map settings menu appears.
Select POI Symbols On Map
X
W to confirm.
Select Standard Symbols,
X
Symbols or No Symbols.
If you select Personal
points of interest appears.
X
X
and press W to
and press
i
X
Personal
Symbols, the list of
Map operation and settings
To switch the symbol display on/off:
select a point of interest by turning cVd
the COMAND controller and press W to
confirm.
Depending on the previous state of the
symbols, they will either be shown O or
hidden ª. You can switch on the symbol
displays for more than one point of interest.
To switch all personal symbols on/off:
select All and press W to confirm.
Depending on the previous state of the
personal symbols, they will either be shown
O or hidden ª.
If the function is switched on O, the
individual points of interest are grayed out
and the previously selected settings remain
unchanged.
If the function is switched off ª, you can
re-select the individual points of interest.
They show the most recently selected
settings.
The list shows all symbols that are
contained on the digital map across all
countries. However, not all points of
interest are available in all countries. As a
result, certain point of interest symbols
may not be displayed on the map, even if
the symbol display is switched on.
To exit the menu: press the % back
button.
101
Z