Reconnecting - Mercedes-Benz COMAND Operating Instructions Manual

®
Bluetooth audio mode
174
Option 2 (Secure Simple Pairing): if the
X
digit codes displayed in COMAND and on
®
the Bluetooth audio device are the same,
confirm Yes by pressing W.
If you select Yes, authorization continues
and the Bluetooth
connected. Playback starts.
If you select No, authorization will be
canceled.
i
®
The Bluetooth
support the Bluetooth
connection via Secure Simple Pairing.
COMAND creates a six-digit code, which is
displayed on the two devices that are to be
connected.
External authorization: COMAND may
X
not be able to locate your Bluetooth
device due to the specific security settings
®
of the Bluetooth
case, check whether your Bluetooth
device can locate the COMAND system
( page 118). The Bluetooth
Y
of COMAND is MB
After successful authorization, the
®
Bluetooth audio device is connected and
starts playing.
Reconnecting a Bluetooth
device
®
The Bluetooth audio profiles are connected
automatically under the following
circumstances:
one of the last two mobile phones to have
R
been connected has also been used as a
®
Bluetooth audio player (if this function is
supported by the mobile phone).
the mobile phone takes over the automatic
R
connection itself.
®
A Bluetooth audio player without telephone
functions is not automatically reconnected,
even if it was the last device connected.
If the No Bluetooth Audio Device
Connected message appears, you have two
®
audio device is
audio device must
®
version 2.1 for
®
audio
audio device itself. In this
®
audio
®
device name
Bluetooth.
®
audio
options to connect a Bluetooth
device:
Option 1
Confirm Connect Last Device
X
basic display by pressing W the COMAND
controller.
If COMAND can locate the Bluetooth
audio device, it will be connected and will
start playing.
i
With some Bluetooth
playback must be initially started on the
device itself, so that COMAND can play the
audio data.
Option 2
Select BT Audio by turning cVd the
X
COMAND controller and press W to
confirm.
Confirm Bluetooth Audio Device List
X
by pressing W the COMAND controller.
®
Select a Bluetooth audio device by turning
X
cVd the COMAND controller and press
W to confirm.
If COMAND can locate the Bluetooth
audio device, it will be connected and will
start playing.
i
With some Bluetooth
playback must be initially started on the
device itself, so that COMAND can play the
audio data.
Bluetooth ® audio device and
simultaneous search for mobile phones
During the search for mobile phones
( page 116), the connection with the
Y
®
Bluetooth audio device is terminated. In the
Bluetooth ® audio basic display
( page 176), you will see the
Y
Business Cards message and the
Received Business Cards
cannot be selected.
®
audio
in the
®
®
audio devices,
®
®
audio devices,
Received
menu item