Gracenote Media Database - Mercedes-Benz COMAND Operating Instructions Manual

You will find further information on searching
for music in the "Music search" section
( page 165).
Y
In audio CD/audio DVD mode/MP3 mode,
X
select Search by sliding VÆ and turning
cVd the COMAND controller and press
W to confirm.
The category list appears.
Select Current Tracklist,
X
category and press W to confirm.
Current track list (example)
Select the track by turning cVd the
X
COMAND controller and press W to
confirm.
The basic display appears and the track is
played.
Fast forwarding/rewinding
While the display/selection window is
X
active, slide XVY and hold the COMAND
Audio CD/DVD and MP3 mode
controller until the desired position has
been reached.
or
Press and hold the E or F button
X
until the desired position is reached.

Gracenote Media Database

Introduction
This function is only available in audio CD
mode.
There is a version of Gracenote
recognition technology (Emeryville,
California, USA) on the COMAND hard disk.
You will recognize this by the logo which can
be seen in the bottom right-hand corner of
certain audio displays.
Folder or a
Many audio CDs contain CD text. COMAND
uses the information contained therein to
display the artist, album and track name.
If the audio CD does not contain any CD text
information, COMAND can use the Gracenote
Media Database to identify unknown audio
tracks when running in audio CD mode. This
is only possible if the relevant information is
saved in the Gracenote Media Database and
if the "Gracenote Media Database" function
is activated.
If this is the case, COMAND will display the
corresponding data such as artist, album and
track name in the relevant displays and lists.
If COMAND accesses the Gracenote Media
Database when reading an audio CD, you will
see the following message:
161
®
music
Z