Mercedes-Benz COMAND Operating Instructions Manual page 193

To reconfirm your selection: confirm
X
Select by pressing W.
COMAND executes the action.
Make a selection from the further options,
if necessary.
COMAND then switches back to the DVD
menu.
i
Depending on the DVD, the menu items:
Back (to movie), Play,
Stop, ., / or Go Up
function or may not function at certain
points in the DVD menu. To indicate this,
the K icon appears in the display.
Moving up one level in the DVD menu
Select the corresponding menu item in the
X
DVD menu and press W the COMAND
controller to confirm.
or
Select any menu item in the DVD menu and
X
press W the COMAND controller to
confirm.
Select Go Up and press W to confirm.
X
Back to the film
Press the % back button repeatedly
X
until you see the movie.
or
Select the corresponding menu item from
X
the DVD menu.
Select the Back (to movie)
X
the menu and press W to confirm.
Setting the language and audio
format
This function is not available on all DVDs. If it
is available, you can set the DVD menu
language, the audio language or the audio
format. The number of settings is determined
by the DVD content. It is possible that the
settings may also be accessed in the DVD
menu ( page 190).
Y
In full-screen mode, press W the COMAND
X
controller to show the menu.
Select
X
cVd the COMAND controller and press
W to confirm.
Select
X
confirm.
Select
X
Language
In both cases, a menu appears after a few
may not
seconds. The # dot in front of an entry
indicates the currently selected language.
Select a setting by turning cVd the
X
COMAND controller and press W to
confirm.
Subtitles and camera angle
These functions are not available on all DVDs.
The number of subtitle languages and camera
angles available depends on the content of
the DVD. It is possible that the settings may
also be accessed in the DVD menu
( page 190).
Y
In full-screen mode, press W the COMAND
X
controller to show the menu.
Select
X
cVd the COMAND controller and press
W to confirm.
Select
X
confirm.
Select
X
menu item in
press W to confirm.
In both cases, a menu appears. The # dot
in front of an entry indicates the current
setting.
Select a setting by turning cVd the
X
COMAND controller and press W to
confirm.
Video DVD mode
DVD-Video in the menu by turning
DVD Functions and press W to
Menu Language or Audio
and press W to confirm.
DVD-Video in the menu by turning
DVD Functions and press W to
Subtitles or Camera Angle
191
and
Z