Mercedes-Benz COMAND Operating Instructions Manual page 88

Route guidance
86
cVd the COMAND controller and press
W to confirm.
Displaying and editing the recorded
route
Insert the SD memory card (
X
Select List in the Routes menu by turning
X
cVd the COMAND controller and press
W to confirm.
Previously recorded routes are displayed.
Select a route and press W to confirm.
X
The map appears with a menu. The
recorded route is shown in the map with a
blue dotted line.
Turning off from the route on the map
Select Demo by turning cVd the COMAND
X
controller and press W to confirm.
The map with the crosshair appears.
Proceed as described in the "Route
X
demonstration" section (
Starting route calculation
Select
X
the COMAND controller and press W to
confirm.
COMAND attempts to align the recorded
route with the digital map.
page 157).
Y
Editing the route
You can change the route name and the icon.
Select
X
the COMAND controller and press W to
confirm.
To change the route name: select
X
Rename
i
The name cannot be changed while the
vehicle is in motion.
To change the icon: select
X
and press W to confirm.
A description for both entries can be found
X
in the "Personal POIs" section under
"Managing categories for personal POIs"
(
Y
Changing direction for route calculation
You can set the icon for the route to the
starting point or to the destination, thereby
changing the direction for route calculation.
i
During route calculation, one-way streets
or turn restrictions, for example, are taken
into account. Therefore, the outward and
page 84).
return routes may differ from each other.
Y
Start in the menu by turning cVd
Edit in the menu by turning cVd
and press W to confirm.
page 73).
Change Icon