Reception And Transmission Volume; Incoming Call - Mercedes-Benz COMAND Operating Instructions Manual

Telephone operation
120
i
Display ; may vary, depending on the
mobile phone connected.
Bars : display the current signal strength
of the mobile phone network. If all bars are
filled, you have optimum reception.
If no bars are shown, reception is either
very poor or there is none at all.
Receiver icon = shows whether a call is
active/being connected ¡ or not ¢.
Text message (SMS) display in
telephone basic menu
The Text Message
the Bluetooth ® telephone supports the MAP
®
Bluetooth profile (Message Access Profile)
and the text message has been downloaded
from the Bluetooth
item is otherwise grayed out and is not
available.
The 1 mail icon is displayed when you have
an unread text message. The symbol
disappears once you have read the text
message. The ú mail symbol is displayed
when the text message memory is full. The
symbol disappears once you delete at least
one text message.
Further information can be found in the "Text
messages (SMS)" section (

Reception and transmission volume

Once the mobile phone has been authorized,
you can optimize the transmission and
reception volume settings. Find information
on the optimal setting for your mobile phone
on the Internet at
http://www.mbusa-mobile.com. Or call
the Mercedes-Benz Customer Assistance
Center at 1-800-FOR-MERCedes
(1-800-367-6372) (for the USA) or Customer
Relations at 1-800-387-0100 (for Canada).
i
Incorrect settings may have a significant
impact on the quality of calls.
menu item is available if
®
telephone. The menu
page 133).
Y
Press the % function button.
X
Select Phone in the telephone basic menu
X
by turning cVd the COMAND controller
and press W to confirm.
Select Bluetooth Phones
X
confirm.
Select an authorized mobile phone from
X
the list by turning cVd.
Select the list symbol to the right of the
X
entry by sliding VY the COMAND
controller and press W to confirm.
Select Reception Volume
X
Transmission Volume
confirm.
Scale with indicator showing current
:
volume
Select a volume setting by turning cVd the
X
COMAND controller.
To close the setting scale: press W or
X
slide XVY.
Telephone operation

Incoming call

Rejecting or accepting a call
When there is an incoming call, you see a
corresponding window in the display.
and press W to
or
and press W to