Displaying Information - Mercedes-Benz COMAND Operating Instructions Manual

Selecting a channel from the preset list
To call up the preset list: select
X
Presets in the submenu bar by turning
cVd the COMAND controller and press
W to confirm.
The channel preset list appears.
To set a channel: select a preset by
X
turning cVd the COMAND controller and
press W to confirm.
or
Press a number key, such as n.
X

Displaying information

Select Info in the submenu bar by turning
X
cVd the COMAND controller and press
W to confirm.
Information on the currently received
program is displayed.
If available, you see:
the complete channel name
R
the artist of the currently played track
R
the currently played track
R
To return to the radio display: confirm
X
Info by pressing W.
Slide ZV the COMAND controller up.
X
Displaying service information
The provider's customer service center is
available by phone at any time to answer any
general questions or questions on the
versions available.
Satellite radio
Select Sat radio in the submenu bar by
X
turning cVd the COMAND controller and
press W to confirm.
Select Service and press W to confirm.
X
The provider's details appear.
Provider's phone number (SIRIUS XM) or
1
Call Service Provider
SIRIUS ID of your satellite receiver
2
To return to the SatRadio main display:
X
slide XVY the COMAND controller.
Channel list updates
When receiving a new channel list, the display
shows the Updating Channels...
message.
The station last selected is switched to mute
until the update has been completed.
Satellite radio mode is not available during
this process.
Once the update has been completed, the
satellite radio main menu appears. The
station last selected is played.
Sound settings
You will find details on the sound settings in
the "At a glance" section (
153
page 34).
Y