Mercedes-Benz COMAND Operating Instructions Manual page 45

during voice control operation and the
individualization process.
Press the W button.
X
Select Settings by turning cVd the
X
COMAND controller and press W to
confirm.
Select Voice Control
X
confirm.
Select Help Window and press W to
X
confirm.
You have switched the help window on
O or off ª.
Individualization
Introduction
You can use the individualization function to
fine tune the Voice Control System to your
voice and therefore improve voice
recognition. This means that other users'
voices will not be recognized as easily, and
therefore this function can be deactivated
( page 44).
Y
Individualization comprises two parts and
takes approximately five minutes. It consists
of training the system to recognize a certain
number of digit sequences and voice
commands.
Starting new individualization
Individualization can only be started when the
vehicle is stationary. Before starting, switch
off all devices or functions which could
Voice Control System settings
interfere, such as the radio or the navigation
system. After starting the session, the system
guides you through the training with spoken
instructions.
Press the W button.
X
Select
X
COMAND controller and press W to
and press W to
confirm.
Select
X
confirm.
Select
X
and press W to confirm.
You see and hear a prompt asking whether
you would like further information.
Select
X
If you select No, the first part of
individualization begins. You will be asked
whether you would like to train digits or
voice commands.
If you select Yes, you will see and hear
information on the individualization
process. The first part of individualization
then begins automatically.
To close the display: press W the
X
COMAND controller.
You will be asked whether you would like
to train digits or voice commands.
At the end of the first part, a prompt will
appear asking whether you wish to begin the
second part.
Settings by turning cVd the
Voice Control and press W to
Start New Individualization
Yes or No and press W to confirm.
43