Mercedes-Benz COMAND Operating Instructions Manual page 228

Operation with an active COMAND source
226
Select Active Aud./Vid. Source For
X
Rear and press W to confirm.
In the status bar at the top, you will see the
headphones icon and the _ icon for the
source that has been switched on.
To switch off the function in COMAND:
X
switch on the desired audio mode in
COMAND or show the menu in video DVD
mode.
Select the menu item at the bottom left,
X
e.g. CD in audio CD mode, by sliding VÆ
and turning cVd the COMAND controller
and press W to confirm.
Select Rear Audio/Video
X
press W the COMAND controller to
confirm.
Selecting an active COMAND source
in the rear-compartment screen
Loading the active COMAND source
Select
X
buttons on the remote control and press
9 to confirm.
The audio or video source selected in
COMAND is loaded in the Rear Seat
Entertainment System.
When the loading process is complete, the
audio or video source is set in the Rear Seat
Entertainment System.
If Rear Audio/Video Off
COMAND, the
is no active COMAND source
appears.
Audio CD mode
Off_ and
Example: CD mode
COMAND using the 9=;
is activated in
COMAND is off or there
message