Mercedes-Benz COMAND Operating Instructions Manual page 128

Using the phone book
126
Symbol overview
Icon Explanation
Æ
Address book entry that has been entered or changed via COMAND
Imported contact that has been saved in the phone or address book
\
Address book entry with voice tag
i
in vehicles with the Voice Control System (see the separate operating
instructions).
Ã
Contact that has been imported from a mobile phone that supports PBAP
¯
Entry that has been imported from the memory card or USB device
®
Entry imported via the Bluetooth
Searching for a phone book entry
Using the character bar
You determine the first letter of the entry you
are looking for with the first character you
enter.
Select a character by turning cVd the
X
COMAND controller and press W to
confirm.
The first entry in the list that starts with the
letter selected is highlighted. If there are
similar entries, the next different character
is shown. For example, with entries such as
Christel and Christine, the beginnings
of the names are similar. In this case, you
will be offered a choice between
Select the characters of the entry you are
X
searching for one by one and press W to
confirm.
When the selection is clear, COMAND
switches automatically to the selection list.
To complete the search: switch from the
X
phone book with the character bar to the
selection list ( page 127).
Y
The last list entry is automatically
highlighted.
These entries have also been assigned a voice tag. Voice tags are available
E and I.
®
interface
Using the number keypad
Alternatively, you can also enter digits using
the number keypad (direct entry)
( page 29).
Y
Deleting characters
To delete an individual character: select
X
the 2 symbol by turning cVd the
COMAND controller and press W briefly.
or
Briefly press the 2 button
X
Each time a character is deleted, the entry
most closely resembling the remaining
characters is shown at the top of the list.
To delete an entry: select the 2
X
symbol by turning cVd the COMAND
controller and press W until the entry is
deleted.
or
Press and hold the 2 button until the
X
entire entry is deleted.
Changing the language of the character
bar
Select B and press W.
X
Select the desired language.
X