Mercedes-Benz COMAND Operating Instructions Manual page 65

predefined destinations in eight categories
for this purpose, e.g. FILLING STATION
CAFÉ.
When you have entered your intermediate
stop, COMAND automatically recalculates
the route to the main destination.
Entering predefined destinations
To switch on navigation mode: press the
X
Ø function button.
To show the menu: press W the COMAND
X
controller.
Select Destination in the navigation
X
system menu bar by turning cVd the
COMAND controller and pressing W to
confirm.
Select Stopover and press W to confirm.
X
Option 1: the route does not have an
intermediate stop.
Intermediate stop categories
Select a category; see option 2.
X
Option 2: the route already has an
intermediate stop.
Select Change Stopover
X
confirm.
To select a category: select a category by
X
turning cVd the COMAND controller and
pressing W to confirm.
COMAND first searches in the selected
category for destinations along the route.
COMAND then searches for destinations in
a radius of approximately 60 mi from the
or current vehicle position.
If COMAND finds destinations, a list
appears on the right-hand side of the
display.
Search results for the chosen category COFFEE
SHOP (example)
Highlighted intermediate stop, current
:
distance from the vehicle position and
name of the intermediate stop
The intermediate stops along the route are
displayed at the top of the list, sorted by
increasing distance from the vehicle's current
position. Below this, you will see the
intermediate stops that COMAND finds in the
vicinity of the vehicle's current position.
i
For intermediate stops that are not
located along the calculated route, the
linear distance is shown.
Select the intermediate stop by turning
X
cVd the COMAND controller and press
W to confirm.
The address entry menu appears, showing
the destination address.
To start route calculation: select
X
and press W to confirm.
and press W to
If COMAND does not find any destinations,
you will see a message to this effect.
Confirm
X
Select a different category.
X
Destination entry
OK by pressing W.
63
Start
Z