At A Glance" - Mercedes-Benz COMAND Operating Instructions Manual

Using the phone book
128
Creating a new entry in the phone
book
Slide ZV the COMAND controller
X
repeatedly in the phone book until the
selection list appears.
Select the list symbol on the right in the
X
selection list by sliding VY the COMAND
controller and press W to confirm.
Select New entry
X
Select a category for the number, e.g.
X
Home, and press W to confirm.
Select a category for the phone, e.g.
X
Mobile, and press W to confirm.
Select Cont. and press W to confirm.
X
The input menu with data fields appears.
Selected data field with cursor
:
Character bar
;
Enter characters and save the entry.
X
Proceed as described under character
entry in the "At a glance" section
( page 28).
Y
and press W to confirm.
i
The entry is created in the phone book
and in the address book.
Adding telephone numbers to an
existing phone book entry
Select an entry in the selection list by
X
turning cVd the COMAND controller.
Select the list symbol to the right of the
X
entry by sliding VY the COMAND
controller and press W to confirm.
Select Add Phone No.
X
confirm.
Select a category for the number, e.g.
X
Home, and press W to confirm.
Select a category for the phone, e.g.
X
Mobile, and press W to confirm.
Select Continue and press W to confirm.
X
COMAND stores the data if there are fewer
than five numbers assigned to the entry you
are searching for in the selected number
category.
If five numbers are stored for the entry in
the selected number category, a prompt
will appear asking whether you wish to
overwrite one of the existing numbers.
Select Yes or No and press W to confirm.
X
If you select Yes, a selection list will appear
containing the five existing numbers.
If you select No, the process will be aborted.
Select the number to be overwritten by
X
turning cVd the COMAND controller and
press W to confirm.
An input menu appears. The data field for
entering the new phone number is
highlighted.
Enter characters and save the entry.
X
Proceed as described under character
entry in the "At a glance" section
( page 28).
Y
and press W to