No Mouse Pointer Displayed On Screen; Unable To Read From / Write To Floppy Disk - Fujitsu PRIMERGY TX150 S5 Operating Manual

Hide thumbs Also See for PRIMERGY TX150 S5:
Table of Contents

Advertisement

No Mouse Pointer Displayed on Screen

7.6
No Mouse Pointer Displayed on Screen
Mouse driver not loaded
Ê Check whether the mouse driver is properly installed and is activated when
the application program is started. Detailed information can be found in the
user manuals for the mouse, the operating system and the application
program.
Mouse controller disabled
The mouse controller on the system board must be enabled if you are using the
mouse supplied.
Ê In the BIOS Setup, check the settings in the Advanced menu under Peripheral
Configuration, Mouse Controller, and if necessary change the setting to
Enabled or Auto Detect.
7.7

Unable to Read From / Write To Floppy Disk

Ê Check whether write protection for the floppy disk is activated.
Ê Check the disk drive entry in the Main menu of the BIOS Setup. This must not
be set to None.
Ê Check the Diskette Write entry in the Security menu of the BIOS Setup. This
must not be set to Disabled.
82
Operating Manual
Troubleshooting and Tips
TX150 S5

Advertisement

Table of Contents
loading

Table of Contents