Chapter 3 OS Installation
3.1 Quick Installation Mode
In the Quick Installation mode, the OS is installed after configuring minimum required
settings. To install the OS quickly and easily, use the Quick Installation mode.
When installing Windows Server 2008, perform "Full installation".
When installing Windows Server 2008 (64-bit), and when saving the configuration file to a floppy disk,
make sure to change the boot priority in BIOS Setup Utility before starting ServerStart. For details on
how to change the boot priority, refer to "
ServerStart" ( pg.46).
To install the OS while maintaining the established RAID environment, select the Quick Installation
mode.
1
Turn on the server, and insert PRIMERGY Startup Disc immediately.
ServerStart starts up. The select-media window for the configuration file appears.
54
When installing Windows Server 2008 (64-bit) by using