Notes Before Operating The Server; Auto-Run Function From Cd/Dvd Drives - Fujitsu PRIMERGY TX300 S4 User Manual

4.5 Notes before Operating the
Server
This section explains the settings required before starting to operate the server.
For details on the settings, refer to the following URL.
http://www.microsoft.com/technet/prodtechnol/exchange/2003/Library/default.mspx
For the settings of the installed application software supplied with the server, refer to the manuals of
each of them.
For notes on ServerView security refer to "Security" in Section "1.1.7 Note", "ServerView User's
Guide".

4.5.1 Auto-run Function from CD/DVD Drives

Perform the following procedures to change the settings of the auto-run function from the CD/DVD
drives after server installation.
1
Make the registry editable, and change the value of AutoRun of the following
registry key:
HKEY_LOCAL_MACHINE\System\CurrentControlSet\Services\CDRom
Set the value of AutoRun to "1" to enable auto-run, or to "0" to disable auto-run.
2
Restart the system.
The setting is enabled after the system restarts.
PRIMERGY TX300 S4 User's Guide
99