License Plate Recognition (Lpr) Mode - Panasonic AG-CPD15P Operating Instructions Manual

License Plate Recognition (LPR) Mode

Engaging the License Plate Recognition (LPR) mode allows you to start up the
LPR system.
Set the color camera shutter speed to [LPR Shutter Speed] (1/500 or 1/1000)
when using the LPR system.
When a recording trigger starts a recording during license plate recognition,
however, the shutter speed automatically switches to the setting configured for
[Patrol Shutter Speed].
When recording stop criteria are met, the shutter speed automatically returns to
the setting configured for [LPR Shutter Speed] (1/500 or 1/1000).
The diagram below shows how changes in LPR mode settings and starting and
stopping recording by an officer affect shutter speed, camera zoom, OSD and the
[LOCK] lamp.
[LPR Mode] is
set to "LPR"
PATROL
[LPR Mode]
Patrol Shutter
Speed
Shutter speed ∗
Patrol Zoom
Camera zoom
ON
OSD
[LOCK] lamp
∗ The settings available for [Patrol Shutter Speed] are AUTO, 1/100, 1/500, and
1/1000.
The settings available for [LPR Shutter Speed] are AUTO, 1/500, and 1/1000.
Note:
[Patrol Shutter Speed] and [Patrol Zoom] are available also without the license
plate recognition program. (When [Init LPR Mode] is set to "DISABLE", or when
[Init LPR Mode] is set to "ENABLE" and [LPR Mode] is set to "PATROL".)
Recording
trigger input
Prerecording
(time)
LPR PATROL
LPR Shutter Patrol Shutter
Speed Speed
LPR Zoom Patrol Zoom
OFF
Blinking
Recording stop
criteria are met
Postrecording
LPR
LPR Shutter
Speed
LPR Zoom
ON OFF
[LPR Mode] is
set to "PATROL"
PATROL
Patrol Shutter
Speed
Patrol Zoom
ON
33