Dear customer Thank you for purchasing this product. For optimum performance and safety, please read these instructions carefully. Before connecting, operating or adjusting this product, please read these instructions completely. Please keep this manual for future reference. Region number supported by this unit Region numbers are allocated to DVD players and software according to where they are sold.
CAUTION! THIS PRODUCT UTILIZES A LASER. USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELF. REFER SERVICING TO QUALIFIED PERSONNEL. WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR PRODUCT DAMAGE, DO NOT...
2 Batteries for remote control (U.S.A. only) Product Registration Card Please complete and return the included product registration card, or register via the Internet at: http://www.prodreg.com/panasonic/ The remote control ∫ Batteries R6/LR6, AA, UM-3 ≥Insert so the poles (i and j) match those in the remote control.
Control reference guide Remote control Turn the unit on ( page 10) Input select (L1, L2 or L3) Select channels and title numbers, etc./ Enter numbers Cancel Basic operations for recording and play Show Top menu/Direct Navigator page 24, 30) Show sub menu ( page 30) Show on-screen menu (...
STEP Connection ∫ Examples of equipment you can connect to this unit’s terminals Television Cable TV box/satellite receiver Do not place the unit on amplifiers or equipment that may become hot. The heat can damage the unit. Before moving the unit, ensure the disc tray is empty. Failure to do so will risk severely damaging the disc and the unit.
≥The equipment connections described are examples. ≥Before connection, turn off all equipment and read the appropriate operating instructions. ≥Peripheral equipment and optional cables sold separately unless otherwise indicated. Connecting a television and VCR A to X are indexes for Spanish Quick Reference. indicates included accessories.
Page 8
STEP Connection Connecting a cable TV box/satellite receiver ≥You need to subscribe to a cable TV or satellite TV service to enjoy viewing their programming. ≥Consult your service provider regarding appropriate cable TV box or satellite receiver. ≥This unit is not compatible with TV Guide On Screen systems broadcast by satellite. A to Q are indexes for Spanish Quick Reference.
Connecting an amplifier or system component ∫ Connection to a stereo amplifier Amplifier’s rear panel Audio cable To OUT1 or OUT2 If the antenna connector doesn’t match Other antenna connections to the unit Use one of the following connections to suit the antenna lead. ≥If your television has both lead and coaxial VHF terminals, use the lead connection to minimize signal loss.
STEP Setting up the TV Guide On Screen system POWER Í/I POWER DVD POWER Í DVD POWER INPUT SELECT Numbered buttons CANCEL SKIP STOP DIRECT NAVIGATOR TOP MENU SUB MENU PROG/CHECK SETUP SETUP Info After plugging the unit into your household AC outlet and pressing [Í...
Page 11
If you are using a cable TV box, set the following: ≥Cable TV box connection channel (Ch2/Ch3/Ch4/L3) –If you are connecting the cable TV box to this unit’s L3 terminal, select “L3”. –If you are connecting the cable TV box to this unit’s RF terminal, select “Ch2”, “Ch3”...
≥If your television brand is not listed or if the code listed for your 16:9 16:9 widescreen television Television operation e.g., 01: [0] PHILIPS (RC-5) Panasonic National 01, 02 QUASAR SAMSUNG FISHER SANYO SHARP...
Page 13
When other Panasonic products respond to this remote control Change the remote control code on the main unit and the remote control (the two must match) if you place other Panasonic products close together. Use “1”, the factory set code, under normal circumstances.
≥1.4 GB, 8 cm (3z) [DVD-R] ≥We recommend using Panasonic discs. DVD-R from other manufacturers may not be recorded or played due to the condition of the recording. ∫ Which should I use, DVD-RAM or DVD-R? The following chart indicates the differences. Select based upon what you require.
∫ Indemnity concerning recorded content Panasonic does not accept any responsibility for damages directly or indirectly due to any type of problems that result in loss of recording or edited content (data), and does not guarantee any content if recording or editing does not work properly.
Recording television programs HDD, DVD indicator POWER PULL OPEN S-VIDEO IN VIDEO IN L/MONO AUDIO IN Time Slip indicator L2 input terminals DVD POWER POWER INPUT SELECT TV/VIDEO INPUT SELECT DRIVE SELECT Numbered buttons CANCEL SKIP STOP PAUSE ∫ DIRECT NAVIGATOR DIRECT NAVIGATOR TOP MENU...
Recording modes and approximate recording times Depending on the content being recorded, the recording times may become shorter than indicated. DVD-RAM (120GB) Mode Single- sided (4.7 GB) XP (High quality) SP (Normal) LP (Long play) § § EP (Extra long play) 213 (160 8 (6 §...
Recording television programs Refer to the control reference on page 16. Flexible Recording [HDD] [RAM] [DVD-R] The unit sets the best possible picture quality that fits the recording within the remaining disc space. e.g., Recorded Remain 45 minutes in SP mode 60 minutes Program to be recorded Preparation...
Timer recording DVD POWER POWER Í DVD POWER VOLUME INPUT SELECT TV/VIDEO DRIVE SELECT PAGE Numbered buttons AUDIO CANCEL VCR Plus+ CM SKIP SKIP SLOW/SEARCH STOP PAUSE PLAY/x1.3 ∫ DIRECT NAVIGATOR FUNCTIONS TOP MENU ENTER SUB MENU RETURN PROG/CHECK TV GUIDE DISPLAY TIME SLIP SETUP...
Timer recording DVD POWER POWER Í DVD POWER INPUT SELECT TV/VIDEO DRIVE SELECT Numbered buttons CANCEL VCR Plus+ SKIP STOP PAUSE ∫ DIRECT NAVIGATOR TOP MENU ENTER SUB MENU PROG/CHECK DISPLAY TIME SLIP PROG/CHECK SETUP ERASE REC MODE DUBBING Info DUBBING CHAPTER Manually programming timer...
Using VCR Plusi system to make timer recordings Entering PlusCode ® number is an easy way of timer recording. You can find them in TV listings in newspapers and magazines. ≥You can enter up to 8 days in advance. ≥VCR Plusi system works only after this unit downloads the television program list ( page 10).
Timer recording DVD POWER POWER Í DVD POWER INPUT SELECT TV/VIDEO DRIVE SELECT Numbered buttons VCR Plus+ CANCEL SKIP STOP PAUSE DIRECT NAVIGATOR TOP MENU ENTER SUB MENU PROG/CHECK DISPLAY TIME SLIP PROG/CHECK SETUP ERASE REC MODE DUBBING Info DUBBING CHAPTER Info Check, change or delete a program...
Utilizing TV Guide On Screen system Press [TV GUIDE]. Program viewed before the program list was opened. SCHEDULE LISTINGS 8:00PM TODAY Last Channel Advertise- NWGB ments FAVORITES RECORD Icons NWBG Stereo ducation Closed caption ANiMe Re-run Network On-screen guidance The “Green” button refers to [CHAPTER] button. The “Blue”...
Playing discs HDD, DVD indicator POWER DVD POWER POWER INPUT SELECT TV/VIDEO DRIVE SELECT Numbered buttons CANCEL SKIP STOP PAUSE ∫ DIRECT NAVIGATOR DIRECT NAVIGATOR TOP MENU TOP MENU ENTER SUB MENU SUB MENU PROG/CHECK DISPLAY ERASE SETUP ERASE Info DUBBING ≥It is possible to watch playback from one drive while recording from another (editing is not possible).
Operations during play Press [∫]. The stopped position is memorized. “PLAY” flashes in the unit’s display. (Excluding when playing from the Direct Stop Navigator and when playing a play list.) Resume play function Press [1] (PLAY) to restart from this position. Press [;].
Playing discs Refer to the control reference on page 24. Editing operations during play Erase [HDD] [RAM] [DVD-R] Create chapters [HDD] [RAM] Changing audio during play Press [AUDIO]. [HDD] [RAM] [VCD] LR>L>R ^---------------} e.g., “L R” is selected ≥When playing an SAP broadcast recorded on DVD-RAM: MAIN()SAP [Note] You cannot change the audio type in the following cases.
Using menus to play MP3 DVD POWER POWER VOLUME INPUT SELECT TV/VIDEO DRIVE SELECT PAGE Numbered buttons AUDIO CANCEL VCR Plus+ CM SKIP SKIP SLOW/SEARCH STOP PAUSE PLAY/x1.3 DIRECT NAVIGATOR FUNCTIONS TOP MENU TOP MENU ENTER SUB MENU RETURN PROG/CHECK TV GUIDE DISPLAY TIME SLIP...
Using on-screen menus and Status messages DVD POWER POWER INPUT SELECT TV/VIDEO DRIVE SELECT CANCEL VCR Plus+ SKIP SLOW/SEARCH STOP PAUSE DIRECT NAVIGATOR TOP MENU ENTER SUB MENU DISPLAY PROG/CHECK DISPLAY TIME SLIP SETUP ERASE REC MODE Info DUBBING CHAPTER On-screen menus Press [DISPLAY].
Play menu–Change the play sequence This function works only when the elapsed play time is displayed. Repeat play ≥All [VCD] [CD] (excluding MP3 discs) ≥Chapter [HDD] [RAM] [DVD-R] [DVD-V] ≥Group [DVD-A] [CD] (MP3 discs only) ≥PL (Play list) [HDD] [RAM] ≥Title [HDD] [RAM] [DVD-R] [DVD-V] ≥Track...
Editing titles/chapters DVD POWER POWER INPUT SELECT TV/VIDEO DRIVE SELECT CANCEL SKIP STOP PAUSE DIRECT NAVIGATOR DIRECT NAVIGATOR TOP MENU ENTER SUB MENU SUB MENU PROG/CHECK DISPLAY SETUP ERASE Info DUBBING [HDD] [RAM] [DVD-R] Title/Chapter Programs are recorded as a single title consisting of one chapter. Title Chapter Start...
Title operations Press [2, 1] to select “Erase” and press [ENTER]. § Erase ≥The available recording time on DVD-R does not increase when you erase titles. [HDD] [RAM] [DVD-R] Information (e.g., time and date) is shown. Properties [HDD] [RAM] [DVD-R] Enter Name [HDD] [RAM] [DVD-R] If set, this will protect the title from accidental erasure.
Creating, editing and playing play lists DVD POWER POWER INPUT SELECT TV/VIDEO DRIVE SELECT CANCEL VCR Plus+ SKIP SLOW/SEARCH STOP PAUSE DIRECT NAVIGATOR TOP MENU ENTER SUB MENU SUB MENU PROG/CHECK DISPLAY TIME SLIP SETUP ERASE REC MODE Info DUBBING CHAPTER [HDD] [RAM] You can arrange the chapters (...
Editing and playing play lists/chapters Press [FUNCTIONS]. Press [3, 4, 2, 1] to select “PLAY LIST” and press [ENTER]. Press [3, 4, 2, 1] to select the play list. To start play Press [ENTER]. To edit Step 4. PLAY LIST Play List View Create 10/27 Mon 0:30...
Entering text DVD POWER POWER INPUT SELECT TV/VIDEO DRIVE SELECT Numbered buttons CANCEL VCR Plus+ ¢ CANCEL SKIP SLOW/SEARCH STOP PAUSE ∫ DIRECT NAVIGATOR TOP MENU ENTER SUB MENU PROG/CHECK DISPLAY TIME SLIP SETUP ERASE REC MODE Info DUBBING CHAPTER [HDD] [RAM] [DVD-R] You can give names to recorded titles, etc.
Transferring (dubbing) titles or play lists [HDD] [RAM] [DVD-R] You can select from a variety of methods to transfer (dub) on this unit. ∫ Transferring (dubbing) direction You can transfer (dub) your favorite titles and play lists to an archive disc. ≥Transferring (dubbing) a play list will create a title.
Transferring (dubbing) titles or play lists DVD POWER POWER INPUT SELECT TV/VIDEO DRIVE SELECT Numbered buttons CANCEL VCR Plus+ SKIP SLOW/SEARCH STOP PAUSE ∫ DIRECT NAVIGATOR TOP MENU ENTER SUB MENU SUB MENU PROG/CHECK DISPLAY TIME SLIP SETUP ERASE REC MODE Info DUBBING CHAPTER...
Press [3, 4] to select “Start dubbing” and press [ENTER]. Press [2, 1] to select “Yes” and press [ENTER] to start transferring (dubbing). Transferring (dubbing) list icons Titles and play lists that can be transferred (dubbed) in high speed mode to DVD-R page 41) Title with “One time only recording”...
FUNCTIONS window DVD POWER POWER INPUT SELECT TV/VIDEO DRIVE SELECT CANCEL VCR Plus+ SKIP SLOW/SEARCH STOP PAUSE PLAY/x1.3 DIRECT NAVIGATOR TOP MENU ENTER SUB MENU PROG/CHECK DISPLAY TIME SLIP TV GUIDE SETUP ERASE REC MODE Info DUBBING CHAPTER By using the FUNCTIONS window you may access the main functions quickly and easily.
≥Finalizing takes up to 15 minutes. ≥You cannot finalize DVD-R recorded on other manufacturer’s equipment. ≥If you finalize a recorded DVD-R on Panasonic equipment other than this unit, the background selected as “TOP MENU” may not display. Disc display on this unit...
Changing the unit’s settings DRIVE SELECT Numbered buttons CANCEL ¢ CANCEL SKIP STOP PAUSE DIRECT NAVIGATOR TOP MENU ENTER SUB MENU PROG/CHECK DISPLAY SETUP ERASE SETUP Info DUBBING Summary of settings The settings remain intact even if you switch the unit to standby. §1 You need to set these menus only when you do not use TV Guide On Screen system.
Page 41
Tabs Menus Disc Ratings Set a ratings level to limit DVD-Video play. Continued Follow the on-screen instructions. Enter a 4-digit password with the numbered buttons when the password screen is shown. ≥Do not forget your password. Recording Time in EP Mode Select the maximum number of hours for recording in EP mode page 17, Recording modes and approximate recording times).
Page 42
Changing the unit’s settings Tabs Audio Select MTS Select the audio recording type, main or secondary (SAP) audio Continued when: –Recording or transferring (dubbing) to a DVD-R. –Recording or transferring (dubbing) sound in LPCM. below, Audio for XP Recording) You cannot select this when recording from an external source onto DVD-R.
Channel/Clock settings when TV Guide On Screen system is not used Refer to the control reference on page 40. Preparation: If the television program list has already been downloaded, return the unit to the factory preset condition using the steps indicated below. When the unit is on and stopped 1 Press and hold [X CH] and [W CH] on the main unit for about five seconds.
Channel/Clock settings when TV Guide On Screen system is not used Refer to the control reference on page 40. Channel captions You can use the preset captions, or manually enter new ones yourself. The captions you enter are displayed when the channel is displayed and in the Direct Navigator screen. ≥You can set channel captions only after “Auto Channel Setting”...
Glossary Bitstream This is the digital form of multi-channel audio data (e.g., 5.1 channel) before it is decoded into its various channels. CPRM (Content Protection for Recordable Media) CPRM is technology used to protect broadcasts that are allowed to be recorded only once. Such broadcasts can be recorded only with CPRM compatible recorders and discs.
≥All Panasonic televisions that have 480P input terminals are compatible. Consult the manufacturer if you have another brand of television. ≥You can play them if the video standard is NTSC.
For product information or assistance with product operation: In the U.S.A., refer to “Customer Services Directory” on page 52. In Canada, contact the Panasonic Canada Inc. Customer Care Centre at 1-800-561-5505, or visit the website (www.panasonic.ca), or an RQT7305 authorized Servicentre closest to you.
Troubleshooting guide Before requesting service, make the following checks. If you are in doubt about some of the check points, or if the remedies indicated in the chart do not solve the problem, refer to the “Customer Services Directory” on page 52 if you reside in the U.S.A., or refer to the “Product information” on page 48 if you reside in Canada.
Page 50
≥A DVD-R recorded on this unit may not be recordable on other Panasonic DVD recorders. ≥The timer program is incorrect or different timer program times overlap. Correct the program.
Page 51
Play starts but then stops immediately. RAM using a different Panasonic DVD Recorder to this unit’s HDD, but play is not possible due to copyright protection. ≥When recording to DVD-RAM using EP (8H) mode, play may not be possible on DVD players that are compatible with DVD-RAM.
Monday-Friday 9 am-9 pm; Saturday-Sunday 10 am-7 pm, EST. For hearing or speech impaired TTY users, TTY : 1-877-833-8855 Accessory Purchases Purchase Parts, Accessories and Instruction Books online for all Panasonic Products by visiting our Web Site at: http://www.pasc.panasonic.com or, send your request by E-mail to: npcparts@panasonic.com...
Limited Warranty (ONLY FOR CANADA) PANASONIC/TECHNICS PRODUCT—LIMITED WARRANTY Panasonic Canada Inc. warrants this product to be free from defects in material and workmanship and agrees to remedy any such defect for a period as stated below from the date of original purchase.
Guía de referencia rápida en español Conexión de un televisor y videograbadora Consulte la ilustración que aparece en la página 7 de la sección en idioma inglés. ≥Las conexiones del equipo descritas son ejemplos. ≥Antes de hacer la conexión, apague todos los equipos y lea los manuales de instrucciones apropiados.
Page 55
Preparación del sistema de guía de TV en pantalla Consulte la ilustración que aparece en la página 10 de la sección en idioma inglés. Después de enchufar la unidad en una toma de CA de casa y pulsar [Í DVD POWER] para encender la unidad por primera vez, ésta inicia la preparación del sistema de guía de TV en pantalla y establece los canales.
Systems, Inc. U.S. patent Nos. 4,631,603, 4,577,216, 4,819,098, and 4,907,093. Panasonic Consumer Electronics Company, Division of Matsushita Electric Corporation of America One Panasonic Way Secaucus, New Jersey 07094 http://www.panasonic.com C 2004 Matsushita Electric Industrial Co., Ltd. Printed in Japan Enter name disc .
After connecting your DVD Recorder as described on page xx, we now need to enter some information about how you receive TV broadcasts. If further assistance is needed contact Panasonic’s Customer Call Center at 1-800-211-PANA (7262). 1. A few moments after you turn the unit on for the first time a Welcome Screen will introduce you with the TV Guide On Screen system.
Page 58
2. Using the UP/DOWN arrow keys on the remote, select the country you live in and press the “ENTER” key to continue. 3. Using either the numeric keypad or the UP/DOWN arrow keys on the remote, enter your zip code. Press the “ENTER” key to continue.
Page 59
4. If you receive TV programming via cable TV, select, “Yes” using the UP/DOWN arrow keys on the remote and press “ENTER.” If you use a roof top antenna, select “No”, press the “ENTER” key and proceed to Step 11. 5.
Page 60
7. Using the UP/DOWN arrow keys please select the channel your cable box outputs a signal on. If your cable box offers Audio/Video outputs select “Video 1”for optimum video quality. For cable boxes without Audio/Video outputs, select the appropriate channel to receive the cable box signal. Press the “ENTER” key to proceed. 8.
Page 61
9. Select the brand of cable box you have, and press “ENTER.”. 10. We’ll now begin trying various IR codes to see which one communicates properly with your cable box. It’s quite common that this phase of the setup may have to be repeated numerous times.
Page 62
12. Once at least 24 hours has passed since the setup information was entered, you're ready to perform the final step of the installation procedure. When the unit is powered up you'll see a screen asking you to select the proper channel line-up. A channel line-up is the numerical designations for each station your cable company caries.
Page 63
• The TV Guide On Screen system was designed such that all TV viewing would be done using your DVD Recorder to select the channels. When a cable box is used, and the DVD Recorder is placed in the standby mode, the DVD Recorder will cause the cable box to automatically scan channels to search for program data.
Page 64
LISTINGS MODE • The [LISTINGS] mode is the first screen displayed when the “Guide” button on the remote is pressed. This mode displays the Station, Title, Time, Length and contents and ratings. It allows the user to scroll through current and future program listings.
Page 65
2. Press the DOWN button then use the LEFT/RIGHT arrow buttons to select RECORD. 3. Press the Green button on the remote to set the Timer. 4. Use the remote and follow the on-screen prompt to input the Date, Start Time, End Time and Channel of the program to be recorded.
Page 66
• The [SORT] mode provides the user with the ability to preview program listings for various categories, such as movies, sports, children’s, educational, news, variety, series and alphabetically for up to 8 days. Each category will contain individual sub-categories. 1. From Main Menu, use the LEFT/RIGHT buttons on the Remote to select [SORT] 2.
Page 67
• The [SCHEDULE] mode contains the list of programs designated for FAVORITES/RECORD. FAVORITES and RECORD timers are displayed on separate lists. In addition to reviewing the list, the user may also remove the shows, change the frequency or modify the start/end times (only when recording) of the shows selected.
Page 68
PROMOTIONS MODE • The [PROMOTIONS] mode provides the user with a list of promotional items that have appeared as Panel Ads or Channel banners during the current day. The list also displays the TV Guide On Screen “FEATURES” and “USING…” panels displayed prior to initial listings download.
Page 69
CHANGE CHANNEL DISPLAY MODE • The [Change Channel Display] mode allows the user to customize the list of channels displayed on-screen by turning the channels ON or OFF. Additionally, the user has the option of changing the assigned channel to a different position on the LISTINGS grid.
Page 70
Note: If the Cancel button on the Action Bar is selected, it will reverse all channel number and ON/OFF changes made during the prior session. Channels that were recently turned on, will display “No Listing” until the next data download occurs. FREQUENTLY ASKED QUESTIONS 1.
Page 71
Answer: Refer to the TV Guide On Screen section of the owner’s manualor follow the on-screen setup diagram or your TV owner’s manual. 11. Q: I’ve entered the setup data. When will I be able to view my TV program listings and use other TV Guide On Screen system features? Answer: After the setup data has been entered, the initial data download for the TV Guide On Screen system requires your unit to be placed in the Standby mode for the first 24 hours.
Page 72
The TV was left powered ON for an extended period of time and the TV Guide On Screen system was unable to receive program data. During the data download the station from which data is downloaded had an unscheduled outage. If using an off-air antenna, marginal poor reception can cause some of the data to be missed.
Page 73
Menu Bar, highlight Setup and choose “Change system settings”. Verify the data you entered is correct. 2. The cable company may have recently changed their channel lineup and has not yet informed industry sources of the changes. Use the Channel Editor feature to make changes. 12.
Page 74
Answer: Yes. Highlight the LISTINGS panel on the Main Menu Bar then press the GREEN (+24hrs) or BLUE (-24hrs) keys on the remote. In the SORT mode the user can skip to the next day’s listings by pressing the LEFT or RIGHT arrow key on the remote. Note: Time slots that have already passed cannot be accessed.
Page 75
5. Q: Can I record one channel while watching another? Answer: (without a cable box) Yes. If the TV picture becomes “fuzzy” when the Recorder turns on to record, simply press the TV/VIDEO button on the remote (not necessary on “pass through” only units with no ¾ modulation).