Audio Sources When Recording; Power-On Recording - Panasonic AG-CPD15P Operating Instructions Manual

On Recording

Audio sources when recording

The Memory Card Video Recorder
can record up to two audio channels
(Audio1 and Audio2). Out of the
three audio input connectors on the
rear panel ([AUDIO IN 1, 2], and [IN
CAR MIC]), the signal of the source
connected to the [AUDIO IN 1]
connector will always be recorded
on the Audio1. For the Audio2, you
can select either the sound from the
[AUDIO IN 2] connector or the [IN CAR
MIC] connector. This selection is made
using the Remote Control Panel.
The following two audio recording
modes are available: INCAR and
WMIC
INCAR
Audio input at the [IN CAR MIC]
connector is recorded on the second
audio channel (Audio2).
WMIC
Audio input at the [AUDIO IN 2]
connector is recorded on the second
audio channel (Audio2).

Power-on recording

The recorder automatically starts
recording when it is powered on.
Also when the recorder is operating
with the [PowerOff Time] setting,
recording will start automatically when
the recorder is turned on.
26
(continued)