Control Reference Guide of the Remote Control Panel
Front panel
LCD panel
Shows images and operation menus.
AUTO ZOOM button
Provides automatic control of zoom-in,
pause and zoom-out operation.
The officer can set zoom ratio and
pause time. (see "Zooming" on page 55)
BOOK MARK button
Press during recording or playback
to enter bookmarks. A set bookmark
displays an icon
for 1 to 2 seconds when pressed.
(see "Adding bookmarks" on pages
64, 67)
Backlight compensation button
∗
(
)
1, 2
Press to compensate for strong
backlighting. This button toggles
between ON and OFF at each press.
(see "Making a backlit image easier
to view" on page 55)
∗
Zoom buttons
Use these buttons to zoom out (W-
button) and zoom in (T-button).
(see "Zooming" on page 55)
∗1 A commercially available camera connected to the [CAMERA2] connector cannot be controlled.
∗2 The lamp turns on when the [CONTROL PANEL ON/OFF] button is set to ON.
R E T U R N
M E N U
C O N T R O L P A N E L
O N /
O F F
∗
1, 2
∗
2
on the display
1, 2
REC lamp
Lights or flashes during recording.
(see "Indicator Lamps and Recorder
Status" on page 110)
∗
REC button
2
Press to start recording video and
sound to P2 card. (see "Starting
recording" on page 63)
STOP button (
)
Stops recording. (see "Stopping
recording" on page 63)
AUDIO2 MUTE button/lamp
Starts/releases recording for Audio2.
Pressing this button turns the lamp
on/off. While the lamp is lit, Audio2
is not being recorded. (see "To mute
Audio2 input sound" on page 55)
∗
IR MODE button
Switches the IR mode to one of the
following modes.
AUTO: Automatically changes IR mode
depending on ambient brightness.
ON: Turns on the IR mode.
OFF: Turns off the IR mode.
CAMERA SELECT button
Each press of the button toggles the
recorder between the [CAMERA1]
and [CAMERA2] connector inputs.
(see "Selecting a camera" on page 55)
Volume control buttons ( )
Adjusts speaker sound volume.
Brightness buttons ( )
Adjusts LCD panel brightness.
∗
2
1
47