Service Mode; Self-Diagnosis And Special Mode Setting; Self-Diagnosis Functions - Panasonic DMR-ES35VEG Service Manual

8 SERVICE MODE

8.1. (DVD) SELF-DIAGNOSIS AND SPECIAL MODE SETTING
8.1.1. (DVD) SELF-DIAGNOSIS FUNCTIONS
Self-Diagnosis Function provides information for errors to service personnel by "Self-Diagnosis Display" when any error has
occurred.
U**, H** and F** are stored in memory and held.
You can check latest error code by transmitting [0] [1] of Remote Controller in Service Mode.
Automatic Display on FL will be cancelled when the power is turned off or AC input is turned off during self-diagnosis display is ON.
Error Code Diagnosis contents
U30 Remote control code error
U59 Abnormal inner temperature
detected
U61 The unit is carrying out its
recovery process (with no
disc in the disc tray).
U88 The unit is carrying out its
recovery process (with no
disc in the disc tray).
U99 Hang-up
F00 No error information
F58 Drive hardware error
F34 Initialization error when main
microprocessor is started up
for program recording
UN- Unsupported disc error
SUPPORT
Description
Display appears when main unit and remote
controller codes are not matched.
Display appears when the drive temperature
exceeds 70°C.
The power is turned off forcibly.
For 30 minutes after this, all key entries are
disabled. (Fan motor operates at the highest
speed for the first 5 minutes. For the
remaining 25 minutes, fan motor is also
stopped.) The event is saved in memory as
well.
* The unit detected an error while recording
or playing with with no disc in the disc
tray.
The unit is carrying out its recovery process.
This process restores the unit to normal
operation. The unit is not broken. Wait until
the message disappears.
* The unit detected an error while recording
or playing with with no disc in the disc
tray.
The unit is carrying out its recovery process.
This process restores the unit to normal
operation. The unit is not broken. Wait until
the message disappears.
Displayed when communication error has
occurred between Main microprocessor and
Timer microprocessor.
Initial setting for error code in memory
(Error code Initialization is possible with error
code initialization and main unit
initialization.)
When drive unit error is detected, the event
is saved in memory.
When initialization error is detected after
starting up main microprocessor for program
recording, the power is turned off
automatically.
The event is saved in memory.
*An unsupported format disc was played,
although the drive starts normally.
*The data format is not supported, although
the media type is supported.
*Exceptionally in case of the disc is dirty.
19
Monitor Display Automatic FL display
No display
"*" is remote controller code of the
main unit.
Display for 5 seconds.
No display
"U59 is displayed for 30 minutes.
No display
No display
No display
Displayed is left until the [POWER]
key is pressed.
No display No display
No display No display
No display No display
"This disc is
incompatible."
Display for 5 seconds.
DMR-ES35VEG / DMR-ES35VEC