Panasonic AG-CPD15P Operating Instructions Manual page 39

Setup
(continued)
Setting Item
6 Camera
Zoom Limit
AGC Level
Init Backlight
Init AE Shift
Flip
AutoZoom
Magnification
AutoZoom Time
Init Camera LED ON
Init IR Mode
IR Level
IR Time
∗2 Applies the setting in effect when power was last turned off. Unless power is
turned off properly, the operating state may not be saved correctly.
∗5 When the [Init AE Shift] setting is "+2" and the target is dark, the image may not
refresh at 30 frames/sec.
∗6 The [IR Level] and [IR Time] settings apply only when the [Init IR Mode] setting
is "AUTO".
Factory Default Value Description
Color Camera setting
22 Maximum zoom magnification
Setting : 22, 220
HIGH Color Camera automatic gain control setting
Setting : LOW, MID, HIGH, OFF
OFF Initial backlighting compensation setting
(upon power on)
Setting : ON, OFF, LAST
0 Initial exposure compensation of Color
Camera video (upon power on)
Setting : -2, -1, 0, +1, +2, LAST
OFF Color Camera image top/bottom flip enable/
disable
Setting : ON (Top/bottom flip enabled),
10 Magnification of auto zoom
Setting : 1, 2, 3, 4, 5, 7, 10, 15, 22
3 Auto zoom magnification retention time
(seconds)
Setting : 3, 5, 8
Initial Color Camera [REC] lamp enable/
disable setting (upon power on)
Setting : ON ([REC]lamp lights during recording),
AUTO IR switching function
Setting : AUTO (Automatically
LOW IR auto switching level setting
Setting : LOW, HIGH
30 IR auto switching level detection time
(seconds)
Setting : 10, 30, 60, 300
∗
2
(perform backlighting compensation
when on)
OFF (Top/bottom flip disabled)
OFF ([REC]lamp does not light),
∗
LAST
2
function on/off),
OFF (Force IR function off),
ON (Force IR function on),
∗
LAST
2
∗
6
(Continued on the next page)
∗
5
∗
2
switch IR
∗
6
39