Panasonic AG-CPD15P Operating Instructions Manual page 58

Viewing Live Video
Setting camera zoom (in LPR mode)
The camera zoom can be set in the
range 1.0 to 22.0 x.
This menu is available only when [Init
LPR Mode] in administrator setup is
set to "ENABLE" and [LPR Mode] is
set to "LPR".
And this menu is available only when the
[CAMERA1] connector input is selected
by the [CAMERA SELECT] button.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Camera] and press [
confirm the entry.
3. Use the [ , ] buttons to select
[LPR Zoom].
The
LPR Zoom
Press the [ ] button to raise and the
[ ] button to lower the ratio.
Note:
A recording started by a recording
t r i g g e r d u r i n g l i c e n s e p l a t e
recognition will automatically switch
the camera zoom setting to [Patrol
Zoom]. When recording stop criteria
are met, the camera zoom setting
is automatically switched to [LPR
Zoom].
Setting shutter speed (in PATROL mode)
Set a shutter speed to capture sharp
video of fast-moving subjects.
This menu is available only when [Init
LPR Mode] in administrator setup is
set to "ENABLE" and [LPR Mode] is
set to "PATROL".
And this menu is available only when the
[CAMERA1] connector input is selected
by the [CAMERA SELECT] button.
1. Press the [MENU] button.
The Menu appears.
58
(continued)
] to
appears.
X 1.0
2. Use the [ , ] buttons to select
[Camera] and press [
confirm the entry.
3. Use the [ , ] buttons to select
[Patrol Shutter Speed].
The
Patrol Shutter Speed
4. Use the [ , ] buttons to
select a shutter speed.
AUTO:
Automatically adjusts the shutter
speed to ambient light.
1/100, 1/500, 1/1000:
Set as required by the subject.
Setting camera zoom (in PATROL mode)
The camera zoom can be set in the
range 1.0 to 22.0 x.
This menu is available only when [Init
LPR Mode] in administrator setup is
set to "ENABLE" and [LPR Mode] is
set to "PATROL".
And this menu is available only when the
[CAMERA1] connector input is selected
by the [CAMERA SELECT] button.
1. Press the [MENU] button.
The Menu appears.
2. Use the [ , ] buttons to select
[Camera] and press [
confirm the entry.
3. Use the [ , ] buttons to select
[Patrol Zoom].
The
Patrol Zoom
Press the [ ] button to raise and the
[ ] button to lower the ratio.
] to
appears.
AUTO
] to
appears.
X 1.0