Panasonic AG-CPD15P Operating Instructions Manual page 121

Error messages
No.
E28402 All USB storages are read only.
Couldn't start export.
E28403 Media error.
Export is incomplete.
E28404 USB storage file system error.
Couldn't start export.
E28405 USB storage write error.
Export is incomplete.
E28406 Found update file in USB
storages.
Couldn't start export.
E28407 No P2 cards.
Couldn't start export.
E28408 Found unformatted P2 cards.
Couldn't start export.
E28409 Couldn't start export.
E28499 System error.
Export is incomplete.
E28880 USB storage was ejected.
Export is incomplete.
E28881 USB storage was inserted.
Export is incomplete.
(continued)
Message Measure
Connect a write-enabled USB memory
device.
Replace the P2 card or the USB
memory device.
Replace the USB memory device.
Delete the update file on the USB
memory device.
Insert a P2 card with recorded files.
Insert a formatted P2 card with data
stored on it.
Replace the P2 card with another one.
Reboot this unit.
Do not remove the USB memory device
while exporting data. Reconnect the
USB memory device and export again.
Export the data again.
121