Panasonic AG-CPD15P Operating Instructions Manual page 16

Connections
Audio input
(mic level)
AUDIO OUT VIDEO OUT
IN CAR MIC
AUDIO IN CAMERA 2
Audio input 1
(line level) (commercially
available)
Audio input 2
(line level)
Camera cable
(provided with the
separately sold
Color Camera)
Trigger cable
(included in the separately
sold Cable Kit)
Others: Input signal lines
White: Recording status output via
GPIO9
Black: Connect to the negative
terminal (GND:
Gray:
This is the input line for a signal or
vehicle speed pulse
RS-232C:
∗ There are two types of vehicle speed pulse signals: digital waveforms (square
waves) and analog waveforms (AC waveforms). The recorder accepts only
digital waveforms. Ask your supplier about the connection procedure.
16
(continued)
PC (commercially
available)
Remote Control Panel
(separately sold)
CONTROL PANEL
CAMERA 1
Camera
Color Camera
(separately sold)
) of the battery
∗
Connect to a commercially
available radar gun
LAN cable (cross
cable, commercially
available)
GPS antenna
(included in the
separately sold
Cable Kit)
GPS-ANT.
(OPTION)
GPIO/SERIAL
Power cable
(included in the
separately sold
Cable Kit)
Black
(GND: )
Red
(BATT: )
White (SIGNAL):
USB memory device
(commercially available)
USB Extension
Cable (included
in the separately
sold Cable Kit)
USB
: Connect to the negative
terminal of the battery
: Connect to a terminal that
always supplies power
through a fuse, regardless
of whether the engine is
on or off
Connect the signal line
through a fuse to the
ACC line or to the
output terminal of a
timer device.