Panasonic AG-CPD15P Operating Instructions Manual page 117

Error messages
No.
E02461 Couldn't delete files.
E02470 System error
Couldn't restore files.
E02471 Couldn't restore files.
E02481 Write error on slot1.
Record cannot be continued.
E02482 Write error on slot2.
Record cannot be continued.
E07671 Camera communication error.
Camera cannot be controlled.
E08601 Lid open.
Playback and record cannot
be performed.
E08602 The recorder's fan has
stopped.
E10400 Radar model file not found.
E10401 More than five radar model
files found.
E10402 Invalid radar model file found.
E10403 Radar model file read error.
E10410 Radar communication error.
Please check the radar setting.
E15751 Card is run-down.
Replace P2 card on slot1.
E15752 Card is run-down.
Replace P2 card on slot2.
(continued)
Message Measure
Check the card information, and proceed
as follows according to the information.
CARD PROTECT:
Release the write-protect switch of the
P2 card.
UNFORMATTED:
Replace with the formatted P2 card.
REFORMAT:
Upload or export data to back it up and
reformat the card.
NO CARD:
Insert a P2 card.
Others:
Replace the P2 card with another one.
Contact your supplier.
Be sure to use the correct procedure
to remove and load P2 cards. Replace
a P2 card that is not recognized after
inserting it in the P2 card slot and
closing the P2 card slot cover.
The Color Camera may not be correctly
connected. Check whether the camera
cable (included in the Color Camera)
is correctly connected to the Color
Camera. Contact your supplier if this
measure does not solve the problem.
Close the P2 card slot cover.
Contact your supplier.
A P2 card is nearing the end of its
service life. While it will still be possible
to record and play back a P2 card after
this message has appeared, you are
recommended to replace it.
117