License Plate Recognition (Lpr) Mode - Panasonic AG-CPD20P Operating Instructions Manual

License Plate Recognition (LPR) Mode

Engaging the License Plate Recognition (LPR) mode allows
you to start up the LPR system.
Set the color camera shutter speed to [LPR Shutter Speed]
(1/500 or 1/1000) when using the LPR system.
When a recording trigger starts a recording during license
plate recognition, however, the shutter speed automatically
switches to the setting configured for [Patrol Shutter Speed].
[LPR Mode]
Shutter speed*
Camera zoom
[LOCK] lamp
* The settings available for [Patrol Shutter Speed] are AUTO, 1/100, 1/500, and 1/1000.
The settings available for [LPR Shutter Speed] are AUTO, 1/500, and 1/1000.
Notes:
• The License Plate Recognition (LPR) mode is activated
when a color camera connected to the [CAMERA 1]
connector is used.
• [Patrol Shutter Speed] and [Patrol Zoom] are available also
without the license plate recognition program. (When [Init
LPR Mode] is set to "DISABLE", or when [Init LPR Mode]
is set to "ENABLE" and [LPR Mode] is set to "PATROL".)
Recording
[LPR Mode] is
trigger input
set to " LPR"
Post-recording
PATROL LPR
Patrol Shutter LPR Shutter
Speed Speed
Patrol Zoom
LPR Zoom
When recording stop criteria are met, the shutter speed
automatically returns to the setting configured for [LPR
Shutter Speed] (1/500 or 1/1000).
The diagram below shows how changes in LPR mode
settings and starting and stopping recording by an officer
affect shutter speed, camera zoom, and the [LOCK] lamp.
[LPR Mode] is
Recording stop
set to " P ATROL"
criteria are met
Post-recording
(Time)
PATROL
LPR
Patrol Shutter LPR Shutter
Speed Speed
LPR Zoom
Patrol Zoom
Blinking
18
PATROL
Patrol Shutter
Speed
Patrol Zoom