Lan Connector; Usb Connector - Panasonic AG-CPD15P Operating Instructions Manual

Control Reference Guide
Rear panel (2)
AUDIO OUT
IN CAR MIC
AUDIO IN
GPS-ANT. (OPTION) connector
Insert the cable from the GPS
antenna (included in the separately
sold Cable Kit). During GPS
reception, the signals received will
regularly and automatically set the
recorder clock to GPS time.

LAN connector

Connect the recorder to a PC using
a commercially available LAN cable
(cross cable).
Note:
For details on how to connect a PC,
contact your supplier.

USB connector

A commercially available USB memory
device can be connected for use as
external memory.
Not all USB memory devices may be
recognized.
Notes:
• To protect the [USB] port, connect
the USB extension cable (included
in the separately sold Cable Kit) to
the recorder before connecting a
commercially available USB memory
device.
• A maximum of two USB memory
devices can be connected when
using a commercially available
USB hub.
(continued)
VIDEO OUT
GPS-ANT.
(OPTION)
CONTROL PANEL
CAMERA 2
CAMERA 1
Note:
USB
GPIO/SERIAL
• Consult your supplier for help with
connection.
GPIO/SERIAL connector
This combo connector accepts
up to eight trigger signal (GPIO1-
8) inputs, provides one recording
status output to GPIO9 and also
serves as a serial port. Connect the
trigger cable here (included in the
separately sold Cable Kit).
DC IN connector
(
This connector accepts power from
the vehicle battery.
Connect the power cable here
(included in the separately sold
Cable Kit).
Do not pull out the power cable
while the recorder is running.
Turning the power off especially
during access (for example, during
recording) may damage the P2 card
or corrupt file management data,
setting information and other data
on the P2 card.
Cable Clamp
Use this clamp to affix video, audio,
camera cables and the power and
USB extension cables included in
the separately sold Cable Kit.
)
13