To Manually Adjust The Audio Recording Level; Remote Setting - Panasonic DMR-E100H Operating Instructions Manual

∫ Various Setting
DVD TV
VIDEO Plus+ DIRECT TV REC
1 2
Numeric
4
5
Buttons
7 8
CANCEL
0
STOP
SKIP
STOP
DIRECT NAVIGATOR
TOP MENU
3, 4, 2, 1
ENTER
FUNCTIONS
FUNCTIONS
STATUS MARKER
FRAME
POSITION
DISPLAY
MEMORY
PROG/CHECK TIMER
A
To Manually Adjust the Audio
Recording Level
The unit adjusts the recording level automatically to prevent sound
distortion due to excessive peaks.
You can adjust manually the audio recording level.
[1] Before recording, keep pressing
[AUDIO] for 3 or more seconds.
To adjust the left (L) and right (R) channels simultaneously:
[2] Confirm that "L/R" is selected and use
[2, 1] to adjust the audio recording
level.
[3] Press [ENTER] to exit the On Screen
Display.
To adjust the left (L) and right (R) channels individually:
[2] Use [3, 4] to select either the left (L)
or right (R) channel and individually
adjust their audio recording level with
[2, 1].
Example:
Audio REC Level
L
When the left (L)
L/R
channel is selected.
R
[3] Press [ENTER] to exit the On Screen
Display.
For your reference
≥It is not possible to adjust the audio recording level when
recording from DV equipment.
DVD TV
DVD
HDD DVD
INPUT SELECT AV
3
CH
6
VOLUME
9
-/--
PAUSE PLAY/x1.3
SLOW/SEARCH
PAUSE PLAY/x1.3
PLAY LIST
MENU
ENTER
RETURN
RETURN
DUBBING REC MODE
MANUAL SKIP TIME SLIP
AUDIO
ERASE REC
B C D
AUDIO
L +8
30 20 15 10 5 0 OVER
R -6
CH SELECT
ADJUST
RETURN
ENTER

Remote Setting

Panasonic DVD players and recorders use the same remote
control system so they may respond unintentionally to a command
from this remote control. Change the code on this unit and its
remote control (the two must match) if you place equipment close
together.
≥Use "1", the factory set code, under normal circumstances.
[1]
While stopped
Press [FUNCTIONS].
[2] Select "SETUP" with [3, 4, 2, 1] and
press [ENTER].
≥The SETUP screen appears.
[3] Select "Settings" tab with [3, 4] and
press [2] or [1].
[4] Select "Remote" with [3, 4] and
press [ENTER].
[5] Select "DVD 1", "DVD 2" or "DVD 3"
with [3, 4] and press [ENTER].
The remote control code on the unit has been set.
[6] While pressing [ENTER] on the remote
control, press the numeric buttons
([1], [2], or [3]) corresponding to the
code you selected in step 5.
The remote control code on the remote control has been set.
[7] Press [RETURN].
The following display appears when you use a remote control with
a different code.
If you are trying to use this unit's remote control, change its code to
match the unit's (# step 6).
62
(page 29)
The unit's remote control code