Using The Mouse - Interlogix TruVision User Manual

Chapter 4: Operating instructions
Task

Using the mouse

The USB mouse provided with the recorder can be used to operate all the functions of
the unit, unlike the front panel which has limited functionality. The USB mouse lets you
navigate and make changes to settings in the user interface.
Connect the mouse to the recorder by plugging the mouse USB connector into the USB
port on the back panel or the front panel. The mouse is immediately operational and the
pointer should appear.
Note: Use a USB 2.0 mouse.
Move the pointer to a command, option, or button on a window. Click the left mouse
button to enter or confirm a selection.
You can purchase a spare mouse by ordering part number TVR-MOUSE-1.
See Table 6 below for a description of the mouse buttons.
Table 3: Mouse buttons
Item Description
Left button Single-Click
Double-Click
Click and Drag
Right button Single-Click
Scroll-wheel Scroll Up
Scroll Down
24
Button Button function
Enter Press to confirm the selection in any of the menu modes.
Live view: Select a camera to display the live view toolbar.
Menu: Select a component of a menu, such as a button or
an input field. This is similar to pressing the Enter button
on the remote/front panel controls.
Live view: Switch between single screen and multi-screen
mode in live/ playback mode.
Live view: Drag channel/time bar.
PTZ control: Adjust pan, tilt and zoom.
Tamperproof, privacy masking and motion detection
functions: Select the target area.
Digital zoom-in: Drag and select target area.
Live view: Display menu.
Menu: Exit the current menu and return to higher level.
Live view: Return to the previous window.
Menu: Move the selection to the previous item.
Live view: Move to the next window.
Menu: Move the selection to the next item.
TruVision DVR 12HD User Manual