Configuring Pppoe - Interlogix TruVision DVR 12 User Manual

Chapter 6: Network settings
Option
Enable DHCP
IPv4 address
IPv4 subnet mask
IPv4 default gateway
IPv6 address 1
IPv6 address 2
IPv6 default gateway
MAC address
MTU (bytes)
Preferred DNS server
Alternate DNS server
3. Click to save the settings.
Apply

Configuring PPPoE

You can connect the DVR directly to a DSL modem. To do this, you need to
select the PPPoE option in the network settings. Contact your ISP to get the user
name and password.
To configure general network settings:
1. From the menu toolbar, click
2. Check the enable PPPoE box.
3. Enter your user name and password and confirm the password.
4. Click to save the settings.
Apply
34
Description
Check this box if you have a DHCP server running and want
your DVR to automatically obtain an IP address and other
network settings from that server.
Default value is Enable.
Enter the IP address for the DVR.
Default value is 192.168.1.82
Enter the subnet mask for your network so the DVR will be
recognized within the network.
Default value is 255.255.255.0
Enter the IP address of your network gateway so the DVR will
be recognized within the network. This is typically the IP address
of your router.
Default value is 192.168.1.1
Enter the IPv6 address for the DVR.
Default value is fe80::240:3dff:fe7e:926f/64.
Enter the IPv6 address for the DVR.
Enter the IPv6 address of your network gateway so the DVR will
be recognized within the network. This is typically the IP address
of your router.
Enter the MC address.
Enter a value between 500 and 9676. Default is 1500.
Enter the preferred domain name server to use with the DVR.
Enter the alternate domain name server to use with the DVR.
Network Settings
>
PPPoE.
TruVision DVR 12 User Manual